What did you do to your 997 today?
Installed:
H&R Springs - https://www.hrsprings.com/applicatio...s/31/554/2006/
Otis Inc LA Wheel Spacers - 15mm Rear / 7mm Front
Ebay Aero Lip Spoiler - https://www.ebay.com/itm/281204299566
Polished Wheels/Decontaminated Wheel Barrels / Ceramic Coated Wheels and Calipers
992 Style rear Emblem on order
H&R Springs - https://www.hrsprings.com/applicatio...s/31/554/2006/
Otis Inc LA Wheel Spacers - 15mm Rear / 7mm Front
Ebay Aero Lip Spoiler - https://www.ebay.com/itm/281204299566
Polished Wheels/Decontaminated Wheel Barrels / Ceramic Coated Wheels and Calipers
992 Style rear Emblem on order
The following 8 users liked this post by Graufuchs:
Amrit.boxer (11-18-2022),
gjenk (11-19-2022),
Hootsama (11-19-2022),
irnnr (11-19-2022),
Lastdragon (03-29-2023),
and 3 others liked this post.
The following users liked this post:
Graufuchs (11-18-2022)
Installed:
H&R Springs - https://www.hrsprings.com/applicatio...s/31/554/2006/
Otis Inc LA Wheel Spacers - 15mm Rear / 7mm Front
Ebay Aero Lip Spoiler - https://www.ebay.com/itm/281204299566
Polished Wheels/Decontaminated Wheel Barrels / Ceramic Coated Wheels and Calipers
992 Style rear Emblem on order
H&R Springs - https://www.hrsprings.com/applicatio...s/31/554/2006/
Otis Inc LA Wheel Spacers - 15mm Rear / 7mm Front
Ebay Aero Lip Spoiler - https://www.ebay.com/itm/281204299566
Polished Wheels/Decontaminated Wheel Barrels / Ceramic Coated Wheels and Calipers
992 Style rear Emblem on order
The following users liked this post:
Graufuchs (11-18-2022)
The following users liked this post:
TerrestrialFlyte (11-18-2022)
Installed:
H&R Springs - https://www.hrsprings.com/applicatio...s/31/554/2006/
Otis Inc LA Wheel Spacers - 15mm Rear / 7mm Front
Ebay Aero Lip Spoiler - https://www.ebay.com/itm/281204299566
Polished Wheels/Decontaminated Wheel Barrels / Ceramic Coated Wheels and Calipers
992 Style rear Emblem on order
H&R Springs - https://www.hrsprings.com/applicatio...s/31/554/2006/
Otis Inc LA Wheel Spacers - 15mm Rear / 7mm Front
Ebay Aero Lip Spoiler - https://www.ebay.com/itm/281204299566
Polished Wheels/Decontaminated Wheel Barrels / Ceramic Coated Wheels and Calipers
992 Style rear Emblem on order
The following users liked this post:
Graufuchs (11-19-2022)
My 2010 had old PPF on the front that was hazed and fading. I had the old PPF removed and a full paint correction done. The factory rear fender film was also removed and replaced with new full rear quarter PPF. Paint was corrected, polished and ceramic coated. I am super impressed with how good it came out. Mirror like finish and the paint looks like new. The car looks incredible in the sun.
The following 3 users liked this post by nydog:
That is the black 992 style rear emblem in Black on my 08 Aero.
Emblem part#s:
SILVER- 992 853 675 H 0U2
BLACK- 992 853 675 H 041
Last edited by Graufuchs; 11-19-2022 at 10:08 AM.
The following 2 users liked this post by Graufuchs:
Amrit.boxer (11-20-2022),
Rhern213 (11-19-2022)
The following 2 users liked this post by Rhern213:
cjarrett (11-19-2022),
frederickcook87 (11-27-2022)
Indeed! The bumper cover is soft enough to bend so I think as long as you don't slam it at really high speeds, its elasticity should help.
Milestone reached after 8,000 kms @ 40 months since acquired. Blondie is as smooth as ever, its flat-6 not missing a beat.
And she gets the front radiator grilles. Excellent fit & finish from Zunsport.
And she gets the front radiator grilles. Excellent fit & finish from Zunsport.
This weekend a bit of speaker repair and now the system sounds proper! then spent a bit of time looking over the car and its service history, going through pelican parts and planning out my next lot of preventative maintenance.
bit of a pain in the butt to replace that door woofer as certainly not a drop in replacement but well worth the effort. not really any easy and tidy ways to fit subs in here but super happy with the way this sounds.
Didn't take pics of the 4" midrange speaker installation as that is basically a drop in replacement but below is a bit of a high level writeup on the 8" door woofers. This is for the base model setup with the "ASK" amp, may be different for those with Bose amp. The Focal ISU200 is a great replacement at good value, and isn't too much deeper than the stock one.
removed the factory woofer mounting, it was a paper cone type and very shallow
gutted the mount
test fitted and had to remove the outer shell here as that was keeping it from sitting flush within the door card/trim. peeled it back flat with pliers and then cut away
sits nicely now
Not pictured here but also had to trim back the door card end which interfaces with the door woofer side. probably would have been easier if i had a dremel but hacked away at it with a craft knife. now sits flush, door trim all clipped in properly, no wierd vibrations/noises inside.
in the end the metal vents on the gt3 rear spoiler had some vibrations at higher volumes, cannot be heard from inside and couldn't quite figure out an easy way to dampen those. something to think about for future.
bit of a pain in the butt to replace that door woofer as certainly not a drop in replacement but well worth the effort. not really any easy and tidy ways to fit subs in here but super happy with the way this sounds.
Didn't take pics of the 4" midrange speaker installation as that is basically a drop in replacement but below is a bit of a high level writeup on the 8" door woofers. This is for the base model setup with the "ASK" amp, may be different for those with Bose amp. The Focal ISU200 is a great replacement at good value, and isn't too much deeper than the stock one.
removed the factory woofer mounting, it was a paper cone type and very shallow
gutted the mount
test fitted and had to remove the outer shell here as that was keeping it from sitting flush within the door card/trim. peeled it back flat with pliers and then cut away
sits nicely now
Not pictured here but also had to trim back the door card end which interfaces with the door woofer side. probably would have been easier if i had a dremel but hacked away at it with a craft knife. now sits flush, door trim all clipped in properly, no wierd vibrations/noises inside.
in the end the metal vents on the gt3 rear spoiler had some vibrations at higher volumes, cannot be heard from inside and couldn't quite figure out an easy way to dampen those. something to think about for future.
The following 5 users liked this post by Amrit.boxer:
Ditchhanger (12-01-2022),
frederickcook87 (11-27-2022),
irnnr (11-20-2022),
myw (11-21-2022),
propchef (11-20-2022)
...Something is up with your oil pressure, sending unit or temperature gauge sender. On an engine as cold as the temp gauge shows, the oil pressure should be at the top of the gauge even at idle. Your pressure looks like that of a fully warmed up engine.
The following users liked this post:
rael (11-21-2022)
@Petza914: Eagle eyes! The car's just been out 300m from the carport and on my way to a Sunday morning drive. Momentarily stopped when I saw the odo mileage reading to take a pic of the dash. Vitals appeared normal even after a spirited 100-km run for an hour - oil temps below 100degC, 1.5-5 oil pressure range, freely revving thru 4k-5k rpm. Nevertheless, will observe more closely for any other unusual symptoms.
Thanks for noting and sharing, Bro.
Thanks for noting and sharing, Bro.
@Petza914: Eagle eyes! The car's just been out 300m from the carport and on my way to a Sunday morning drive. Momentarily stopped when I saw the odo mileage reading to take a pic of the dash. Vitals appeared normal even after a spirited 100-km run for an hour - oil temps below 100degC, 1.5-5 oil pressure range, freely revving thru 4k-5k rpm. Nevertheless, will observe more closely for any other unusual symptoms.
Thanks for noting and sharing, Bro.
Thanks for noting and sharing, Bro.
The following users liked this post:
uncle_sam (11-20-2022)