When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just waiting on the machine shop to get to the UIDS order that is in queue..I sent about 300lbs of sawed 6061 aluminum blocks to them to make a dozen UIDS sumps and valves.6 for Boxster/Cayman and 6 or 996/997....3 of the 911 have already been paid for/claimed...Will be delivered by Christmas .
Wanted to post a few data grabs from recent track days at Little Talladega. I spend all day long on the track in August for over 50 laps in 4 sessions at 100F in the shade to test for function at extreme oil temp...and again a couple weeks ago on OCT 21 another 50 laps in 5 sessions at about 85F and I had two oil temp sensors, and two oil pressure sensors installed to show the oil temp and pressures more like what other people have been showing. What it will not show is that during the sessions my oil temp at the Factory location was at about 300F, and still has stable oil pressure at all times.
This is awesome work, I had been reading all old threads beating the dead horse of M96 oil starvation and now just finished reading your development of this twin pickup kit. If I place the order now can I grab a 996 kit for Christmas, or am I too late?
Thanks for posting. Looks good!
Is my guess of the division of the vertical axis correct?
Yes, that looks correct...the vertical axis numbers show up if all channels are "stacked" on top of each other, but makes looking at a particular channel difficult..spreading out the channels give a good look at them but the vertical numbers don't show up...
There is all kind of ways to display the data depending on what you are looking for...The first thing I look for is that the OP follows the RPM.. as it should..
This is awesome work, I had been reading all old threads beating the dead horse of M96 oil starvation and now just finished reading your development of this twin pickup kit. If I place the order now can I grab a 996 kit for Christmas, or am I too late?
Thank you !! You may can get one of this batch, I' have a few people who have shown great interest and even sent me proof showing their engine was in good condition , and I need to check with them first, but if these get gone I will order another batch..
No, problem, none of the Boxster/Cayman versions have been spoken/paid for...just send me an oil sample/lab report, and if you can do a blow-by test also, that would be great....
@Porschetech3 appreciate the detailed development journey you shared with us here!!! We are quite lucky to have a solution this good after all these years.
One question, what's availability of the kit right now? And would it fit with the M97.01 engine on the new-to-me 997.1 C2S? I would be interested in installing one for the occasional track days I plan to do with this car.
By the way, Road America is my favorite track on this side of the world. Used to do some DEs there with my BMW back when I was still living in midwest.
@Porschetech3 appreciate the detailed development journey you shared with us here!!! We are quite lucky to have a solution this good after all these years.
One question, what's availability of the kit right now? And would it fit with the M97.01 engine on the new-to-me 997.1 C2S? I would be interested in installing one for the occasional track days I plan to do with this car.
By the way, Road America is my favorite track on this side of the world. Used to do some DEs there with my BMW back when I was still living in midwest.
Thank You !!
Yes it will fit the 997.1 3.8 "S" engine... I have a batch being machined as we speak at Decker Machine. ..They were supposed to have already been finished, but a Contract job for the Aerospace Industry delayed the completion ( Titanium material ) ..and Noah is focused on the UIDS project now..
Pm me if you want to secure an order for one...
Last edited by Porschetech3; 01-28-2024 at 03:06 PM.
Hi, I'm also interested in one for a 996.1 3.4L, but I don't see the price listed anywhere. Please PM me or respond as you wish.
I currently have an aftermarket deep sump but still see pressure drops at my local track on long right handers (running stock size Hankook RS4s).
I'm in Canada and my car is stored now, so an oil analysis will need to wait til April...
THanks
Great stuff here. Is there a website we can find some compiled details about this and pre-order? I have a 08 Cayman S, which is actually one of our "K-Swap" development cars. But I do want to run a season with the OE engine.
Hi, I'm also interested in one for a 996.1 3.4L, but I don't see the price listed anywhere. Please PM me or respond as you wish.
I currently have an aftermarket deep sump but still see pressure drops at my local track on long right handers (running stock size Hankook RS4s).
I'm in Canada and my car is stored now, so an oil analysis will need to wait til April...
THanks
Originally Posted by G0ingnowherefast
Great stuff here. Is there a website we can find some compiled details about this and pre-order? I have a 08 Cayman S, which is actually one of our "K-Swap" development cars. But I do want to run a season with the OE engine.
The website is www.ultimateids.com ...the "order now" button is turned off due to not shipping immediately and limited production . You have to contact me directly and receive an Invoice to secure an order.
You can contact me here via pm or through the website....
Installed mine, April 2023. No issues at all. I had seen oil pressure issues on some of my local roads (twisties) - and no longer have any issues on the same roads. Happy customer.
11-11-2023, 03:12 AM
