I drove it .

 

Installed a gas guard bib on my filler pipe inlet. Didn't like the pump nozzle resting on the painted edge when filling. It's the little things, right?

Couldn't find one for Porsche specifically so this one for a classic Corvette fit perfectly: ($20 delivered).

 

Oil change.

Gonna drop the sump next time and see if I've got plastic in there. I'll hit 60k miles soon and I suspect I'll be going after the chain guards by year's end. Starting to think about an engine out and RMS/IMS/Clutch at the same time. Would make a good winter project.

 

More dreaded body work and a getto spray. 4 coats of clear make it shiney. At least 1 run, pretty much my m.o. when i paint

 

Looks good to me. Did you use spray cans or a gun?

 

My local Napa has a paint store. They fill arosol cans with automotive paint. I went with a base clear coat but they can do a single stage too. Its not cheap at $20 for the base and $30 for the clear, i have $110 in it for the paint but its much cheaper then a shop.

 

Sat in the rain at Werks Amelia island this past Saturday been to almost every year first wash out 😩
Rich

 

I went from this to

To this no bumperettes and grills in its place

 

 

For me, The extra black contrast by the plate adds depth to the spoiler, I like the look against the white.

 

May get some grief for this one lol. I swapped out my normal black center console for one in Arena Red.

 

No grief here, love the contrast!

 

Why not paint it white to match the body like mine

 

Ahhh, that IS pretty! My car is wrapped (Inozetek Boneyard) so my thought was something that would also match the Silver exterior when I ultimately pull this off and do a repaint.

 

Dang. Wish I knew that previously. I spent a ton on an airbrush, paint and reducer for something very simple.