What did you do to your 996 today?
#4456
Three Wheelin'
#4457
Rennlist Member
I sprayed in some regular Deoxit which didn't work.
So then I used the Deoxit V.S.O.P. version and it worked. I have the stuff needed for the permanent fix in my Sunset shopping cart in case the light comes back.
#4458
Replaced motor mounts. I think it was needed:
Driver side: New on left. Old on right. Passenger side was similar.
Driver side: New on left. Old on right. Passenger side was similar.
The following 2 users liked this post by jdbornem:
JBari (12-24-2020),
Mike Murphy (12-25-2020)
#4459
#4461
Rennlist Member
#4462
Rennlist Member
Here’s the seller
#4463
Rennlist Member
The following users liked this post:
Mike Murphy (12-26-2020)
The following 5 users liked this post by RedTele:
Billup (12-30-2020),
Einsteiger (12-25-2020),
Gingerman (12-28-2020),
smallbloc (01-03-2021),
TexSquirrel (12-26-2020)
#4466
Rennlist Member
#4467
Instructor
Used the snow shovel to remove all the snow from the Porsche garage and to move it into the other garage in order to install an LN Solution, new main seal, clutch, throwout bearing, check the flywheel, AOS, new Brambacher pan, and new oil..... I want the car to have new oil while it sleeps.......if I can still feel my fingers......as it was impossible with the snowblower because a large tree limb prevented access. The joys of living in the woods surrounded by parkland.
The following 6 users liked this post by NE1N-11:
Billup (12-30-2020),
FLTWRLD996 (12-29-2020),
Leeroy89 (12-28-2020),
Mike Murphy (12-28-2020),
smallbloc (01-03-2021),
and 1 others liked this post.
The following 7 users liked this post by plpete84:
AZPete (12-28-2020),
Gingerman (12-28-2020),
Mike Murphy (12-29-2020),
sasilverbullet (12-29-2020),
smallbloc (01-03-2021),
and 2 others liked this post.