When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Checked mine out and one repaired and the other ready to fail! I'm in for a set and my '88 has the same issue. If dimensions are same or similar, you may have a bigger market than you think!
Checked mine out and one repaired and the other ready to fail! I'm in for a set and my '88 has the same issue. If dimensions are same or similar, you may have a bigger market than you think!
If my suspicions are correct, they should be the same but if you could have a look to check I would much appreciate it.
If my suspicions are correct, they should be the same but if you could have a look to check I would much appreciate it.
G
I have an '86 Carrera. The profile on the door pocket is closer to the 993 Hi-Fi profile than the standard door pocket profile. But not identical.
It looked like the Hi-Fi reinforcement piece might fit if it had 1mm or so trimmed from 'shoulder' end of the piece.
The black surface inside the door pocket is fuzzy. I don't know yet if the underlying material is ABS or some type of pressed hardboard.
Above: Door pocket attachment area of '86 Carrera (screw is missing).
Have been following both threads - Apparently I'm a hi fi guy. Hadn't known there was a difference, good that it has come to light before production of fix/ordering of parts. Really impressed with the effort & co-operation going into this from both parties. Both ( g morat & Beside the box) are gentlemen & scholars.
It's not the hifi or the non-hifi......There is another design. Weird, you'd think that if they were redesigning it, they would have tried to address its fundamental flaw?!?
G
Originally Posted by BesideTheBox
I have an '86 Carrera. The profile on the door pocket is closer to the 993 Hi-Fi profile than the standard door pocket profile. But not identical.
It looked like the Hi-Fi reinforcement piece might fit if it had 1mm or so trimmed from 'shoulder' end of the piece.
The black surface inside the door pocket is fuzzy. I don't know yet if the underlying material is ABS or some type of pressed hardboard.
Above: Door pocket attachment area of '86 Carrera (screw is missing).
So, this is the HiFi version as close as I can tell with the conversions of inches to mm. No way to know really without printing one up and test fitting. Anybody got a spare hifi door pocket or are close to Raleigh with a HiFi optioned car I can test fit on?
Maybe someday I'll get to sorting this out if I get a partner in crime to test fit. I'd prefer local of course as otherwise it adds to the costs and the iteration time. Gonna stick a fork in it for now. This last one was created by taking measurements from a scaled photo and cross checking them against measurements from WithoutTheBox's abs cuts converted to mm.