When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do you have pictures of how your badge is attached from the inside? I am trying to put a badge on my 993 as well but the rear spoiler grill is quite thick so I need to lengthen the little threaded cylinders behind my badge otherwise they are too short.
I cut a slit in some 1/8” silicone tubing and worked it onto the edges of the cover to prevent rubbing on the top. For the bottom I used some bar stock, drilled a hole for the mounting, and used electrical tape on the top of it to prevent it from showing and to also prevent rattling. The studs were long enough that I didn’t need to extend them, but if required, you can probably find machine threaded extensions at Lowe’s or Home Depot.
I cut a slit in some 1/8” silicone tubing and worked it onto the edges of the cover to prevent rubbing on the top. For the bottom I used some bar stock, drilled a hole for the mounting, and used electrical tape on the top of it to prevent it from showing and to also prevent rattling. The studs were long enough that I didn’t need to extend them, but if required, you can probably find machine threaded extensions at Lowe’s or Home Depot.
A while ago a member posted a fix for the door strap issue using some delrin rods cut into wedges and placed on either side of the strap where it does into the car....i was impressed at how simple it looked and the fact that it worked.. i messaged him to ask specifics but no reply..did anyone see this and apply? love to see some pics of what the actual wedges looked like
I got them from Design911. 3.29 British pound each - back in Jan 2021.
But also purchase a whole bunch of other stuff as well.
I think there was a 10% discount as well if purchases over a certain amount.
Follow up to my MPL clutch cylinder install; was finally able to put a few miles on the car and am very pleased. Engagement point slightly lower and I'd have to agree with their 30% effort reduction. Just makes the whole ordeal feel smoother to me.
Next stop: Numeric shifter and GR but at this point might deal with it over the winter.
08-19-2021 | 08:39 PM
