Cargraphic Valve Control Unit (992 GT3 Variant)
#61
Rennlist Member
Thread Starter
Yea I got mine from Supreme Power too. Fast shipping.
#62
Rennlist Member
#63
Burning Brakes
has anyone installed the valve controller on an RS? Since there is no access to engine I was wondering how hard it is to install. I like to do my own installs for stuff like this but this time I might take it to a shop. I guess rear bumper has to come out?
#64
Rennlist Member
Absolute game changer. Disclaimer, I have the OPFs removed as well, but the sound/howl in the midrange is magic, and sounds like previous gens now. I leave the valves open 100% of the time, except when I start the car every morning at 530am for the gym. Open them immediately after leaving the neighborhood
#65
Rennlist Member
I ordered thru Supreme Power in California. $475 pus 2 day shipping for $25. I ordered Wednesday this week and it is coming via FedEx today.
Call Kim at 714-632-1951 or email at kim@supremepower.com.
You can also order direct thru cargraphic in Germany. 475 euros shipped fedex. You can pay via credit card once they send you a link. M.mergenthaler@cargraphic.de
Best,
Brian
Call Kim at 714-632-1951 or email at kim@supremepower.com.
You can also order direct thru cargraphic in Germany. 475 euros shipped fedex. You can pay via credit card once they send you a link. M.mergenthaler@cargraphic.de
Best,
Brian
The following users liked this post:
Gtsilvergt4 (10-07-2023)
#67
Rennlist Member
I just made my own bracket using a 1”
(link). It worked pretty well.
#68
Race Car
I just made my own bracket using a 1” putty knife blade (link). It worked pretty well.
I used the original hole and then cut one more with a bolt, washer, and nut sourced from my local hardware store to connect to the controller unit.
Last edited by Diablo Dude; 12-07-2023 at 12:18 PM.
#69
I cannot thank you (all of you) enough for sharing these photos and experience with starting with a (1) Delete / remove OPF and (2) start with Valvetronic approach. I am doing this on my 992 GT3 in a week or so. If anyone has any audio / video clips -- that would be great. I know that is asking a lot. It's a pretty cheap way to start to try to get OEM+ sound without having to go full crack pipe.
Again, THANK YOU.
SB
The following users liked this post:
Diablo Dude (12-24-2023)
#70
Jon at FLAT6 is great fast shipping, great communication, that is the key. I don’t care if it is delayed or not in stock or backordered. Just say so. It is best bang for the buck mod we can do to our cars. I had FLAT6 do OAP and controllers on wife’s 718 GTS 4.0 that was significant improvement.
#71
Rennlist Member
Guys,
I cannot thank you (all of you) enough for sharing these photos and experience with starting with a (1) Delete / remove OPF and (2) start with Valvetronic approach. I am doing this on my 992 GT3 in a week or so. If anyone has any audio / video clips -- that would be great. I know that is asking a lot. It's a pretty cheap way to start to try to get OEM+ sound without having to go full crack pipe.
Again, THANK YOU.
SB
I cannot thank you (all of you) enough for sharing these photos and experience with starting with a (1) Delete / remove OPF and (2) start with Valvetronic approach. I am doing this on my 992 GT3 in a week or so. If anyone has any audio / video clips -- that would be great. I know that is asking a lot. It's a pretty cheap way to start to try to get OEM+ sound without having to go full crack pipe.
Again, THANK YOU.
SB
The following 2 users liked this post by sparkhill:
Diablo Dude (12-24-2023),
trez63 (02-22-2024)
#72
The following users liked this post:
trez63 (02-22-2024)
#73
Burning Brakes
Still no input/experience/how-to for the RS? Since there is no access to engine bay on RS it makes things more complicated.
#74
This video is very helpful.
https://www.youtube.com/watch?v=_tMYr3ZTKzA
https://www.youtube.com/watch?v=_tMYr3ZTKzA
#75