Thinkdiag Magic
#691
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
A friend has been unsuccessful getting GT3 steering to work on his 991.1 TTS as well. Just putting this out here in case anyone has specific instructions ...
#692
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The GT3 steering option just disables your PSP which disables any assist and gives you a more raw feeling. If you don't have PSP, you won't feel any difference.
#693
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I don’t think that’s true. My car didn’t have power steering plus and the GT3 software made the steering completely different, in a good way.
If I remember correctly, the TTS has a different steering rack than the regular Carrera and the GT3, so the ECU is different.
If I remember correctly, the TTS has a different steering rack than the regular Carrera and the GT3, so the ECU is different.
#694
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks for the responses!!!
#695
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My car stopped chirping when I lock it. Changed siren, still no chirp. Researching the issue, read that chirps can be programmed on or off. Anybody know how to do that?
#696
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Front-end Electronics: Coding value- General- Acoustic feedback for central locking (only permitted in North America)
My car was set to yes to make it chirp when locking.
Last edited by Ken718B; 06-19-2024 at 03:47 PM.
#697
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
@Ken718B hey thanks a lot. Went through the coding, and Thinkdiag already had the code set to yes. Accepted it anyway and still no chirping. I think a sensor in the rear hatch has gone bad or is misaligned as this happened after I finished changing the oil. Get solid door LED when I lock it for about 5 seconds before it starts to blink.
Thanks anyway for the info.
Thanks anyway for the info.
#698
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
@Ken718B hey thanks a lot. Went through the coding, and Thinkdiag already had the code set to yes. Accepted it anyway and still no chirping. I think a sensor in the rear hatch has gone bad or is misaligned as this happened after I finished changing the oil. Get solid door LED when I lock it for about 5 seconds before it starts to blink.
Thanks anyway for the info.
Thanks anyway for the info.
#699
Instructor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So I recently installed new exhaust on my .2 GTS. And it seems as if the exhaust valves are reversed. On normal mode, they're open, and in sport/sport plus, they're closed. I've gone thru the coding options in the Think diag app, one in the ECM and one in Rear Electronics. Both either are "Yes" or "No" for exhaust flap operation. I didn't do both at the same time, but I did do one and the other separately. The ECM option just removed my console button functionality, but it functioned with the steering wheel selector. The "rear electronics" option just kept the valve closed at all times.
I assume OEM flap is normally open and this one is normally closed. (With no vac applied).
Is there a way to reverse the exhaust flap operation? I don't want it to close during high rpm, that defeats the purpose... Any help is appreciated. Thanks.
Edited for context: this is a VR performance exhaust, it was a prototype and they supplied an aftermarket vacuum box for running the flaps. When I bought the exhaust they couldn't confirm the flap operation, theirs vs oem. I obviously don't want to use the aftermarket box, since this has oem functionality already there.
I assume OEM flap is normally open and this one is normally closed. (With no vac applied).
Is there a way to reverse the exhaust flap operation? I don't want it to close during high rpm, that defeats the purpose... Any help is appreciated. Thanks.
Edited for context: this is a VR performance exhaust, it was a prototype and they supplied an aftermarket vacuum box for running the flaps. When I bought the exhaust they couldn't confirm the flap operation, theirs vs oem. I obviously don't want to use the aftermarket box, since this has oem functionality already there.
Last edited by biggreek; 06-19-2024 at 07:29 PM.
#702
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://cimg3.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/img_2914_925292e9d56eaa94893610bf0c1c57b02b0f227c.jpeg)
do I need to download Porsche software? Also can the GT3 steering soft installed with IOS? That’s all I care about at the moment, if I can’t get the android to work.
Last edited by Irfan; 06-21-2024 at 05:01 PM.
#704
#705
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Last edited by innout; 06-21-2024 at 06:22 PM.