Consolidated 991RS thread
#8731
Race Car
Join Date: Jan 2013
Location: The way to hell is paved by good intentions “Wenn ich Purist höre...entsichere ich meinen Browning” "Myths are fuel for marketing (and nowadays for flippers too,,,)" time to time is not sufficient to be a saint, you must be also an Hero
Posts: 4,486
Received 441 Likes
on
263 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Dears track sound is no more no less than GT3
with same exhaust type you ll get same sound from both GT3 and RS
only i am still wondering around RS is putting rear 20" wheels and lower 1" the front and rear + change the exhsust into a race catless one
OR waiting .2 RS
with same exhaust type you ll get same sound from both GT3 and RS
only i am still wondering around RS is putting rear 20" wheels and lower 1" the front and rear + change the exhsust into a race catless one
OR waiting .2 RS
#8732
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Eduardo, I know you are an expert in PTS - I can get my GT3RS in PTS as well and would like to know some of your thoughts. Would you give me your email adress so I can contact u directly? Thanks, Best, Jumpstone
#8733
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Incorrect. a 4.0L will sound a little different from a 3.8L from the GT3 to RS.
#8734
Race Car
Join Date: Jan 2013
Location: The way to hell is paved by good intentions “Wenn ich Purist höre...entsichere ich meinen Browning” "Myths are fuel for marketing (and nowadays for flippers too,,,)" time to time is not sufficient to be a saint, you must be also an Hero
Posts: 4,486
Received 441 Likes
on
263 Posts
#8735
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)
If that doesn't work, try a PM here on Rennlist.
![typing](https://rennlist.com/forums/graemlins/yltype.gif)
![ducking](https://rennlist.com/forums/graemlins/icon107.gif)
Saludos,
Eduardo
Carmel
#8737
Race Car
Join Date: Jan 2013
Location: The way to hell is paved by good intentions “Wenn ich Purist höre...entsichere ich meinen Browning” "Myths are fuel for marketing (and nowadays for flippers too,,,)" time to time is not sufficient to be a saint, you must be also an Hero
Posts: 4,486
Received 441 Likes
on
263 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Wasn t the brit or another jurno saying
what a pity the RS missing last 200 rpm
are making GT3 sound better
what a pity the RS missing last 200 rpm
are making GT3 sound better
#8738
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thing is, it's not missing that last 200 rpm depending on how its measured. The pistons are already traveling faster in this engine than the 3.8L GT3 engine, it's just that they have further to travel.
#8739
Instructor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This 200rpm issue is getting on my nerves!
NERDS:
The basic of moment of inertia is I= Mass x R^2..
In other words: the RS's pistons/conrod/bearing/crank are additionally stressed to the square difference of length in between the two conrods..
PRETTY BOYS:
For each millimeter of additional piston connecting-rod, the result on the surrounding parts is a double punch.. two millimeters, quadruple punch.. three millimeters, 9 times the punch.. four,,, sixteen times... etc, etc..
Either way you read the above, the result is the same proved by further power/tq of the 4.0 over the 3.8 with less RPM's.. Duh!
Wael
#8740
Race Car
Join Date: Jan 2013
Location: The way to hell is paved by good intentions “Wenn ich Purist höre...entsichere ich meinen Browning” "Myths are fuel for marketing (and nowadays for flippers too,,,)" time to time is not sufficient to be a saint, you must be also an Hero
Posts: 4,486
Received 441 Likes
on
263 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey i was the first talking
about piston speed as the real race parameter
to prove 9a1 is better than
so marketing called Mezger engines on race side
but raw sound of GT3 in the last 200 rpm
is fact just adapt to it
about piston speed as the real race parameter
to prove 9a1 is better than
so marketing called Mezger engines on race side
but raw sound of GT3 in the last 200 rpm
is fact just adapt to it
#8741
Instructor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![bowdown](https://rennlist.com/forums/graemlins/bowdown.gif)
What I am trying to point out is: +200rpm in GT3 is counter-matched by faster piston in RS! The final 'burp' is the same!
Cheers!
Wael
#8744
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
GL, you're totally right!
This 200rpm issue is getting on my nerves!
NERDS:
The basic of moment of inertia is I= Mass x R^2..
In other words: the RS's pistons/conrod/bearing/crank are additionally stressed to the square difference of length in between the two conrods..
PRETTY BOYS:
For each millimeter of additional piston connecting-rod, the result on the surrounding parts is a double punch.. two millimeters, quadruple punch.. three millimeters, 9 times the punch.. four,,, sixteen times... etc, etc..
Either way you read the above, the result is the same proved by further power/tq of the 4.0 over the 3.8 with less RPM's.. Duh!
Wael
This 200rpm issue is getting on my nerves!
NERDS:
The basic of moment of inertia is I= Mass x R^2..
In other words: the RS's pistons/conrod/bearing/crank are additionally stressed to the square difference of length in between the two conrods..
PRETTY BOYS:
For each millimeter of additional piston connecting-rod, the result on the surrounding parts is a double punch.. two millimeters, quadruple punch.. three millimeters, 9 times the punch.. four,,, sixteen times... etc, etc..
Either way you read the above, the result is the same proved by further power/tq of the 4.0 over the 3.8 with less RPM's.. Duh!
Wael
Thank you for that technical 'tour de force'. But if I am not technically-minded like a 'Nerd':
![](https://cimg1.ibsrv.net/gimg/rennlist.com-vbulletin/515x665/screen_shot_2015_06_16_at_1_59_49_pm_5a2e60f5d0ebd5c1d736c76e0b63eda6720ad026.png)
nor a 'Pretty Boy' with a fancy 'Ivy League' education & a wardrobe to match:
![](https://cimg9.ibsrv.net/gimg/rennlist.com-vbulletin/457x694/screen_shot_2015_06_16_at_2_01_14_pm_402c5b81164f942e618f31dc2a01669e981e678e.png)
**********
So Wael, can you rephrase your fabulous dissertation for an 'Average IQ Porsche Fan Boy' like me? I mean...what is a 'conrod'? Is someone getting conned here?
![](https://cimg0.ibsrv.net/gimg/rennlist.com-vbulletin/668x449/screen_shot_2015_06_16_at_2_04_09_pm_5b73440f30dd92aee0d229ba6b64ff3b73cd03f3.png)
Just kidding. But it's true that of the high school maths, the only one I understood & liked was Geometry. Algebra I & II were tough & unappealing. And Trigonometry...fuhgeddaboudit!
![ducking](https://rennlist.com/forums/graemlins/icon107.gif)
Saludos,
Eduardo
Carmel
PS I see you are in Lagos. Please send me your email. I have an advance fee proposal for you to help me free up some US government funds unjustly blocked right here in Carmel! For your small $ investment, I promise big returns!
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
.