Flatnose progress
#137
Addict
Rennlist Member
RIP
Rennlist Member
RIP
Thread Starter
Join Date: Feb 2002
Location: London
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Engine having final bits screwed on, including Porsche Motorsport rockers. £ouch.... Motorsport wiring loom fitted.
RSR sequential box fitted. Will probably miss next trackday due to stupid TPS problem.
Almost there peeps...
RSR sequential box fitted. Will probably miss next trackday due to stupid TPS problem.
Almost there peeps...
#139
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Good to see RC stamped the unmistakeable CTR orange on it.
That engine / whole project for that matter is awesome.
That engine / whole project for that matter is awesome.
Last edited by olly964T; 07-27-2010 at 05:34 AM.
#141
Addict
Rennlist Member
RIP
Rennlist Member
RIP
Thread Starter
Join Date: Feb 2002
Location: London
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Quite a lot has been going on in the background, despite my lack of posting recently. The car has been back to the Paint shop a few times to have it finished to the exacting standards of my Bodywork guy. He has also now plumbed in the new oil coolers (a real PITA apparently), and dummy fitted the engine again to work out exact angle required for the end tanks so they can be welded on. Here is a quick pic of the engine whilst all the plumbing was being worked out.
Car should be complete by approx 15 Oct
Car should be complete by approx 15 Oct
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#142
Intermediate
Join Date: Nov 2008
Location: u.k 1994 3.6 turbo
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Quite a lot has been going on in the background, despite my lack of posting recently. The car has been back to the Paint shop a few times to have it finished to the exacting standards of my Bodywork guy. He has also now plumbed in the new oil coolers (a real PITA apparently), and dummy fitted the engine again to work out exact angle required for the end tanks so they can be welded on. Here is a quick pic of the engine whilst all the plumbing was being worked out.
Car should be complete by approx 15 Oct![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Car should be complete by approx 15 Oct
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#143
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well done ...
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#145
Addict
Rennlist Member
RIP
Rennlist Member
RIP
Thread Starter
Join Date: Feb 2002
Location: London
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'll give exact details in due course. But for now assume INSANITY....
I also need a rising rate FPR. Base pressure around 5bar with head room to accommodate 2bar boost. If anyone has one or has good contact, it would be much appreciated. Bosch want over £600...
I also need a rising rate FPR. Base pressure around 5bar with head room to accommodate 2bar boost. If anyone has one or has good contact, it would be much appreciated. Bosch want over £600...
#147
Addict
Rennlist Member
RIP
Rennlist Member
RIP
Thread Starter
Join Date: Feb 2002
Location: London
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
OK, this is a picture of the progress being made putting everything back together. Here one of the CTR oil coolers is being fitted. I'm beginning to see why my Bodywork guy claimed this was a real PITA. These coolers are the CTR bar and plate coolers. Of course we don't use normal welders, end tanks were done by Docking.