When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It is super trick. Its Inconel heat wrap. Its commonly used in turbo applications and headers. The wrap is very light, very thin, and has a sheet, air gap, and more sheet. Trying to keep heat off the rear of the car.
Do a quick google search and you'll see more applications.
.
Very cool stuff. Why the change? Too loud for the street?
did you need to change the fueling at all with the exhaust change?
pete
Very cool stuff. Why the change? Too loud for the street?
did you need to change the fueling at all with the exhaust change?
pete
my exhaust is the same. I noticed the rear bumper getting very hot because of the clearance. So we channeled the rear bar and wrapped the muffler in iconel. The clearance is very tight. Seems to have done the job.
when i first had the headers and exhaust installed along with the 993ss cams already in the car i had Steve Wong do a custom dyno tune on the car.
it made about 15 more wheel when he was done from his stock header chip
I put new tires on and after a few 100 miles was getting a shake. Took a few front end pics. Excuse the dirt. Washed it this weekend. The car gets driven. 500+ miles of back roads 2 weeks ago....
Nice, Thanks for that! I contacted ERP about the possibility of a set of these that provide more caster as well and Cary replied that they do make them on special order. I see you guys did some grinding for the rear bolt on the top hat as well. Are these the extra caster version?