Bitter-Sweet Beginning
#152
Rennlist Member
Thread Starter
The interior is not completed yet, but it will look something like this:
Houndstooth fabric on
- Front seat inserts
- Rear seats inserts (top and bottom)
- Rear top quarter
- Parcel shelf bottom
Houndstooth fabric on
- Front seat inserts
- Rear seats inserts (top and bottom)
- Rear top quarter
- Parcel shelf bottom
#153
Rennlist Member
#154
Rennlist Member
Thread Starter
Im still debating cloth vs leather. It also depends on what condition sport seats I will find. Im planning to complete rear parcel shelf fairly soon. Will update with pics.
Last edited by 964Andrew; 01-16-2015 at 10:49 AM.
#155
Race Car
Cloth vs leather, looks aside, is a question of grip. The reason for cloth fronts on sport seats is because you don't slide around in the seat. It makes a HUGE difference. When I redid mine, they had been all cloth front, and I made the change to all leather with cloth centers...sort of best of both worlds...more durable bolsters and grippy centers.
When you aren't sliding around in your seat, you don't use your grip on the wheel, or your shoulders, or your feet planted on the floor to keep your body from moving in hard corners. Leaves you relaxed and able to use the pedals and steer the car with a light touch.
Therefore, if that's the point, all leather isn't really the way to go. But if the "function" of the seat and material isn't primary...then all good...
When you aren't sliding around in your seat, you don't use your grip on the wheel, or your shoulders, or your feet planted on the floor to keep your body from moving in hard corners. Leaves you relaxed and able to use the pedals and steer the car with a light touch.
Therefore, if that's the point, all leather isn't really the way to go. But if the "function" of the seat and material isn't primary...then all good...
#160
Burning Brakes
You will need similar tools to these:
For the 13mm exhaust nuts
http://www.sears.com/craftsman-13mm-...p-00943204000P
For the 8mm barrel hex nuts.
http://www.grainger.com/product/1AL9...=44-27338487-2
For the 13mm exhaust nuts
http://www.sears.com/craftsman-13mm-...p-00943204000P
For the 8mm barrel hex nuts.
http://www.grainger.com/product/1AL9...=44-27338487-2