UK 964 Track Day Club
#557
Instructor
Join Date: Jun 2008
Location: DURHAM ENGLAND
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's a shot of myself at Teesside Autodrome sprint yesterday, weather was perfect all day so good time by all except one guy in a concours Lotus Sunbeam that rolled it in the afternoon which was devastating to see but a reminder has dangerous this sport is!
Last edited by evanscott964; 10-21-2014 at 07:01 PM.
#558
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
How are your sill covers and shark fin attached? Are they relatively quick release?
I spend a long weekend on the Zolder circuit in Belgium each year and there are usally a good collection of 964s that turn up. One car I saw about 2 years back had the rear bumper attached with the help of 2 dzus fasteners. One each side positioned about 2 inches in and down from the leading edge of the bumper where it joines the rear wing/arch. It was really well done and allowed him to remove the rear bumper in minutes. I'm going to keep an eye out for him this year and paw all over his car to see how he's done it as I really like the idea.
#559
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You need a non race licence, which is £43.00 currently (and doesnt require a medical or ARDS test) You also need to belowng to one of the affiliated motor clubs (I belong to Sevenoaks and district, which is £20.00 a year)
Biggest cost, if running in a roadgoing class is the need for an MSA compliant helmet and Overalls, between £400.00 and £500.00 for the pair as a minimum.
Car needs to be MOTd and insured, only mods required are yellow tape on the battery earth and a sticker on the ignition showing which way is off. Seats and harnesses if fotted do not need to be inside the homolgation dates for these classes
Regs and classes differ dependant on the orgainsers. Class I had to run in was dominated by Imprezas and Evos . I ended up 40th out of 100 entries and went progresively quicker every run, so it was a good day all round.
Looking forward to next year, and some other venues in between
#560
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Grant, its a really nice event, in a beautiful place
You need a non race licence, which is £43.00 currently (and doesnt require a medical or ARDS test) You also need to belowng to one of the affiliated motor clubs (I belong to Sevenoaks and district, which is £20.00 a year)
Biggest cost, if running in a roadgoing class is the need for an MSA compliant helmet and Overalls, between £400.00 and £500.00 for the pair as a minimum.
Car needs to be MOTd and insured, only mods required are yellow tape on the battery earth and a sticker on the ignition showing which way is off. Seats and harnesses if fotted do not need to be inside the homolgation dates for these classes
Regs and classes differ dependant on the orgainsers. Class I had to run in was dominated by Imprezas and Evos . I ended up 40th out of 100 entries and went progresively quicker every run, so it was a good day all round.
Looking forward to next year, and some other venues in between
You need a non race licence, which is £43.00 currently (and doesnt require a medical or ARDS test) You also need to belowng to one of the affiliated motor clubs (I belong to Sevenoaks and district, which is £20.00 a year)
Biggest cost, if running in a roadgoing class is the need for an MSA compliant helmet and Overalls, between £400.00 and £500.00 for the pair as a minimum.
Car needs to be MOTd and insured, only mods required are yellow tape on the battery earth and a sticker on the ignition showing which way is off. Seats and harnesses if fotted do not need to be inside the homolgation dates for these classes
Regs and classes differ dependant on the orgainsers. Class I had to run in was dominated by Imprezas and Evos . I ended up 40th out of 100 entries and went progresively quicker every run, so it was a good day all round.
Looking forward to next year, and some other venues in between
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#561
Nordschleife Master
Thread Starter
#562
Three Wheelin'
#563
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#564
Three Wheelin'
#565
Instructor
Join Date: Jun 2008
Location: DURHAM ENGLAND
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi Rob
The side sills etc are held in place by Pro Bolts button hd cap screws, I just replaced the red push in socket with rivbushes M6, and used the same throughout.
I'm going to do the same with the bumpers just to aid getting the car on a trailer etc!
Steve
What's the dates for Curborough I'm going to try and get down to meet up if possible
Cheers
Simon
The side sills etc are held in place by Pro Bolts button hd cap screws, I just replaced the red push in socket with rivbushes M6, and used the same throughout.
I'm going to do the same with the bumpers just to aid getting the car on a trailer etc!
Steve
What's the dates for Curborough I'm going to try and get down to meet up if possible
Cheers
Simon
#568
Three Wheelin'
#569
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi Rob
The side sills etc are held in place by Pro Bolts button hd cap screws, I just replaced the red push in socket with rivbushes M6, and used the same throughout.
I'm going to do the same with the bumpers just to aid getting the car on a trailer etc!
Steve
What's the dates for Curborough I'm going to try and get down to meet up if possible
Cheers
Simon
The side sills etc are held in place by Pro Bolts button hd cap screws, I just replaced the red push in socket with rivbushes M6, and used the same throughout.
I'm going to do the same with the bumpers just to aid getting the car on a trailer etc!
Steve
What's the dates for Curborough I'm going to try and get down to meet up if possible
Cheers
Simon
![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
#570
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![burnout](https://rennlist.com/forums/graemlins/burnout.gif)