When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Robin welded on mounting plates to the rear bumper supports to brace the lower edge of the rear liner; elsewhere a combination of the stock studs and a few carefully added nutserts will hold the liners in place. Quick coat of black paint and we should be done tomorrow.
Are your lads not allowed to use a workbench or have they been naughty and so required to sit on the floor?
(Loving the updates!)
Those are 9meister elves. Normally found seated cross-legged on the floor with a ruddy glow to the complexion due to copious rum toddies, a cap on the head, and a pipe clenched firmly in the mouth. Nothing too unique here I think.
Although I wouldn't have the brass to wear it while sitting in the car! I'd have it on the mantelpiece to admire.
...Nah, what it needs is some road grime across the peak and front aspect, a'la open cockpit 917 and the like.....it's gotta look used not all pristine.
...Nah, what it needs is some road grime across the peak and front aspect, a'la open cockpit 917 and the like.....it's gotta look used not all pristine.