Track car pics
#153
Addict
Rennlist Member
Rennlist Member
Thread Starter
#154
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Now getting to the nitty and the gritty.....Jim and Gary got itchy today.
either the o-ring or the little clear plastic was leaking here
great walls at 91k
glad we had the extra head done ahead of time
![](http://forums.rennlist.com/upload/camoff.jpg)
either the o-ring or the little clear plastic was leaking here
![](http://forums.rennlist.com/upload/camleak.jpg)
great walls at 91k
![](http://forums.rennlist.com/upload/cylinders.jpg)
![](http://forums.rennlist.com/upload/cyl11.jpg)
![](http://forums.rennlist.com/upload/cyl4.jpg)
glad we had the extra head done ahead of time
![](http://forums.rennlist.com/upload/91khead.jpg)
#155
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That's right... concentrate on posting (and working on) your own car....
Cylinders (what we can see of them) look as good as the head and front seals look ugly! Nice move on the new LR head.
Cylinders (what we can see of them) look as good as the head and front seals look ugly! Nice move on the new LR head.
#156
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks Don. You wouldn't have a copy of the updated vacuum drawing anywhere would you? Did you delete the IAS too? If you do could you email it to me at blpski@yahoo.com ...or anyone who has it in jpeg form TIA!
We hope to have it fired up Monday, June 7th for the first test drive; we'll see. Jim is going to try to have the crossover pipe off and the old turbo out by the time I get there so that should speed things up on that weekend of the 4,5, and 6th.
We hope to have it fired up Monday, June 7th for the first test drive; we'll see. Jim is going to try to have the crossover pipe off and the old turbo out by the time I get there so that should speed things up on that weekend of the 4,5, and 6th.
#157
Addict
Rennlist Member
Rennlist Member
Thread Starter
#159
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally posted by turbite
Howd you guys get that interior so clean?
You just use a heat gun to get all the gook off then spray paint it?
Howd you guys get that interior so clean?
You just use a heat gun to get all the gook off then spray paint it?
This isn't the best pic I have, but it's the best I could find quickly.
#161
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Some impressions from the brutal path...
1. Car
2. Cage
3. Acid bath
4. New Look
All pictures here...
1. Car
![](http://www.transaxle.net/forum/images/outsider/bild10.jpg)
2. Cage
![](http://www.transaxle.net/forum/images/outsider/bild12.jpg)
3. Acid bath
![](http://www.transaxle.net/Forum/images/outsider/lauge4.jpg)
4. New Look
![](http://www.transaxle.net/Forum/images/outsider/outsider-2.jpg)
All pictures here...
#162
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally posted by WolleMS
real good cleaning work... how long does it took ?
real good cleaning work... how long does it took ?
I have no idea. It took quite a while. Using the heat gun left lots of thick adhesive residue. I wouldn't think 30-40 hours would be out of the question. But, I'm pretty particular about that. I went back more than once to an area I already declared to be done to get it a little better. The problem is, once you paint it, going back and getting the gunk off is pretty much out of the question.
Here's a photo of what I started with:
![](http://home.earthlink.net/~geo3/Por23.jpg)
Obviously the spot on the left floor is post cleaning.
#163
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Tom, cool pix!
As long as we're sharing, here are some pix of my cage. I have now installed the dash bar (which will run through the dash itself) and the passenger door X. I just have to have a few welds completed (I only tack - I weld like a monkey with one hand and three tails), add a few misc brackets, and finished the mounting plates.
If I were to do it over, I might consider moving bar that is the upper front part of the X lower and tying from it where it attached to the front down tube to the firewall and gussett between it and about 6" above the down tube bend. But, my dash bar ties in right where the top of the X is, so it's pretty solid.
As long as we're sharing, here are some pix of my cage. I have now installed the dash bar (which will run through the dash itself) and the passenger door X. I just have to have a few welds completed (I only tack - I weld like a monkey with one hand and three tails), add a few misc brackets, and finished the mounting plates.
If I were to do it over, I might consider moving bar that is the upper front part of the X lower and tying from it where it attached to the front down tube to the firewall and gussett between it and about 6" above the down tube bend. But, my dash bar ties in right where the top of the X is, so it's pretty solid.
![](http://home.earthlink.net/~geo31/Cage1b.jpg)
![](http://home.earthlink.net/~geo31/Cage2b.jpg)
![](http://home.earthlink.net/~geo31/Cage3b.jpg)
![](http://home.earthlink.net/~geo31/Cage4b.jpg)
![](http://home.earthlink.net/~geo31/Cage5b.jpg)
#164
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Join Date: May 2001
Location: Virtually Everywhere...
Posts: 4,820
Likes: 0
Received 5 Likes
on
5 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](http://www.transaxle.net/forum/images/outsider/bild12.jpg)
It looks like most of these cages are not going too far back in the car. Here's mine showing the rear most bars going way back to the side pockets:
![](http://www.tech-session.com/images/cage/images/P0003978.jpg)
Also, our door bars look very similar, but yours are so much closer to the chassis! Nice detail! Here's mine before painting:
![](http://www.tech-session.com/images/cage/images/P0003990.jpg)
I think if I build another one, I'd go for the full door intrusion NASCAR bar setup to give myself some more crush zone and make entry/exit easier. The diagonal door bar is almost too close to my elbow when driving... it's "acceptable".
Great looking projects in here!
#165
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally posted by Skip
It looks like most of these cages are not going too far back in the car
It looks like most of these cages are not going too far back in the car