What have you done to your 944 S2 Cabriolet?
03-11-2013, 09:33 AM
#392
Burning Brakes
Join Date: Dec 2009
Location: Montreal, Quebec, Canada
Posts: 1,045
Received 0 Likes
on
0 Posts
03-13-2013, 07:45 AM
#394
Burning Brakes
Join Date: Dec 2009
Location: Montreal, Quebec, Canada
Posts: 1,045
Received 0 Likes
on
0 Posts
I cant see how speakers on the back shelf would be much good unless you drive with the roof closed often. With it open wouldn't the roof completely cover the speakers. I changed the rear speakers for components and since my roof is manual put the tweeters in the holes for the emergency crank. Here is a link to my thread.
https://rennlist.com/forums/showthre...ferrerid=76285
https://rennlist.com/forums/showthre...ferrerid=76285
03-16-2013, 11:40 AM
#397
Three Wheelin'
Damn valve cover bolts one of them is stripped and I had to extract with a vice grip. Guess I will figure out the best way to source a new one tomorrow.
The valve cover is off and will be dropped off at the powder coater tomorrow. Fuel lines are off and awaiting new ones from Lindsey.
I decided I am doing the cover in Black and going with silver for the fuel lines. My plug wires are red (they were on the car when I got it) but I will go back to black next time they need changing. Overall I think that the black valve cover suits the black on black car and the silver will add a bit of bling along with the chrome strut bar.
Really warm day out getting excited to put her on the road soon
The valve cover is off and will be dropped off at the powder coater tomorrow. Fuel lines are off and awaiting new ones from Lindsey.
I decided I am doing the cover in Black and going with silver for the fuel lines. My plug wires are red (they were on the car when I got it) but I will go back to black next time they need changing. Overall I think that the black valve cover suits the black on black car and the silver will add a bit of bling along with the chrome strut bar.
Really warm day out getting excited to put her on the road soon
It was warm enough over here also. Did the rebuilt control arm swap since ball joint s were going and went for quick spirited drive.
03-17-2013, 11:54 PM
#398
Instructor
mhr replace all four if you can the replace. They are to be replaced every 5 years ( original type) I am replacing mine this week if I could figure out why I can't post picks I will put up a few.
also has anyone had carpet redyed or seats? I have linen interior and would like to refresh at some point
also has anyone had carpet redyed or seats? I have linen interior and would like to refresh at some point
03-18-2013, 09:20 AM
#399
Burning Brakes
Join Date: Dec 2009
Location: Montreal, Quebec, Canada
Posts: 1,045
Received 0 Likes
on
0 Posts
I will probably do the fronts later in the summer.
On this topic when I install the new lines should I use Teflon tape on the screw on hose joints? Just doing some plumbing in the house this weekend and thought about it.
On this topic when I install the new lines should I use Teflon tape on the screw on hose joints? Just doing some plumbing in the house this weekend and thought about it.
03-19-2013, 09:22 AM
#402
Burning Brakes
Join Date: Dec 2009
Location: Montreal, Quebec, Canada
Posts: 1,045
Received 0 Likes
on
0 Posts
03-19-2013, 06:53 PM
#403
Instructor
here is a link to 944 thread about line replacement. on the second page you can see the lines on my S2.
I did not put any thing on the threads and did not notice any thing on the ones I removed.
as you can read on that thread my front lines were original and very brittle. the back lines were 03 and more felexible.
http://www.944online.com/cgi-bin/for...98;start=15#29
I wish I could figure out why I can't post pics
I did not put any thing on the threads and did not notice any thing on the ones I removed.
as you can read on that thread my front lines were original and very brittle. the back lines were 03 and more felexible.
http://www.944online.com/cgi-bin/for...98;start=15#29
I wish I could figure out why I can't post pics
