mhr

very nice! enjoy it

azbanks

Welcome. Your car looks great with the Carrera lightweights on it.

Wahooz

Thanks for the welcome and kind words...love the car. It only has 73K miles on it and previous owners took exceptional care of it (with records to prove it). I've already done the chain pads, just b/c I couldn't find it anywhere in the service history and clutch has already been done twice and TB/WP recently completely. Next project is tunes as it's rockin' the 1990 Alpine tape deck and dead Blau EQ!

azbanks

I got tired of my floor mats sliding forward so I made up some straps to click into the connectors on the underside of the mats. I only took pics of the drivers side straps.

I also zip tied the wires for the boost gauge and the wide band O2 sensor gauge up under the dash. The ends kept falling down around the clutch pedal. They are running up into the A pillar. Why do I have wires for a boost gauge and an O2 sensor you ask??? Just planning for the next phase of upgrades. The wires are run, I just need to install the gauge pod on the pillar and then do the engine upgrades.

azbanks

Replaced the air cleaner assembly with a K&N cone filter. The car has a whole different sound under WOT.

mhr

Any change to power?

I have a k&n cone as well but never drove with a stock so don't know if there is a difference.

azbanks

The butt dyno says it is faster but it could be my imagination.

culture

i agree. lets see if we can get together before they throw salt on the ground!

culture

had a cone filter for a while then i got tired of the sound and went back to stock. like the quiet better, and didnt feel any slower so...

89Por944S2Cab

#5 has 124,700 and #7 has 101,000. I have one in the shop having the waterpump timing belt and motor mounts replaced. Winter weather here, so they won't get used much for a while. Hope to post a few questions I have in the near future. Happy New Year!

1933beer

az banks like the straps idea I will have to do it to mine. how did you attach to the florrmats? stitch?
I am replacing the my fuel lines to stainless kit is from 944 online. that will come first but would like to do it while she is parked for winter.

mhr

Can u please post a link to the kit. I have to do mine this winter.

1933beer

the s2 needs two sets

http://www.944online.com/cgi-bin/ASI...elSystem-944s2

and

http://www.944online.com/cgi-bin/ASI...elSystem-944s2

call them ian, steve or jamie will answer it costs a bit but it is better than the eventual result.

mhr

Thanks

Ouch costly.

azbanks

My mats have the other side/part of the plastic clips already attached. It looks like they came that way from the manufacturer.