Do I have any recourse, out $1150 and no iForged wheels! [long]
#91
Addict
Rennlist Member
Rennlist Member
Thread Starter
Originally Posted by heinrich
Yeah Mr Bailey ... in other word STFU ... .. Jim that was good, I was about to reply with maybe a zillion mentions
#94
Originally Posted by Chuck Z
I think we have this situation worked out to everyone's (mine and iForged's) satisfaction. I spoke to Vince several times today and traded a couple PM's. Details to follow.....
I'd very much appreciate keeping all comments to a minimum (or none at all) until I am certain this will work out which should be tomorrow or Monday. Thanks and I hope you all understand.
I'd very much appreciate keeping all comments to a minimum (or none at all) until I am certain this will work out which should be tomorrow or Monday. Thanks and I hope you all understand.
#95
Range Master
Pepsie Lite
Lifetime Rennlist
Member
Pepsie Lite
Lifetime Rennlist
Member
Think they learned a lesson here?
The "List" can be a powerful marketing tool, orrrrrrr not......, because bad news travels as fast as the speed of light...... 'specialy when the bad news involves a popular 'lister.
Let us know how it works out Chuck, the troops are on standby...........
The "List" can be a powerful marketing tool, orrrrrrr not......, because bad news travels as fast as the speed of light...... 'specialy when the bad news involves a popular 'lister.
Let us know how it works out Chuck, the troops are on standby...........
#99
Addict
Rennlist Member
Rennlist Member
Thread Starter
I wanted to post an update to this situation. Today the iForged wheels were delivered again to my home. Vince has lived up to his word and the wheels were in the same condition as they were when I last returned them to iForged. They were in new boxes as promised (after all, they went back and forth across the country 5 times). Settlement was this: The $1150 charge will not be chellenged or disputed by me, I also paid an additional $100 to ship the wheels back to me again (I offered). I will in turn remove my previous comments about this situation from this post. I believe this post is the only time I ever mentioned them by name (I think there was one other post - I'll search).
Now, I have to find a way to make shorter lug nuts that seat properly. Any ideas?
OBTW, H, Thank you so much for your personal involvement in moving this issue forward. Your efforts made a difference and are much appreciated. I owe ya one!
Now, I have to find a way to make shorter lug nuts that seat properly. Any ideas?
OBTW, H, Thank you so much for your personal involvement in moving this issue forward. Your efforts made a difference and are much appreciated. I owe ya one!
#100
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Chuck I would try the open ended steel nuts and cut off the exposed end of some alloy nuts and use them to screw on the exposed end of the studs a bit like a lock nut.
#101
Captain Obvious
Super User
Super User
Originally Posted by Jim bailey - 928 International
Chuck I would try the open ended steel nuts and cut off the exposed end of some alloy nuts and use them to screw on the exposed end of the studs a bit like a lock nut.
#103
Rennlist Member
Matt, there is not enough meat on the centers to machine it down enough to make the correct lug nuts sit flush.
Chuck, glad you guys worked things out.
Chuck, glad you guys worked things out.
#105
Addict
Rennlist Member
Rennlist Member
Jim has a very good idea! Then all you would have to do is buy plastic nut caps! They come in chrome, silver or black and look like real lug nuts, but stupidly cheap. I have my original black ones underneath.