Looking for all nine 1987 U.S. Turbo Cup cars
12-06-2015, 12:36 PM
#676
Rennlist Member
Thanks Paul.
They do look similar but I am afraid they wont fit. The Turbo Cup brackets hole pattern is a bit curved to match the holes in the seat when adjusting between the holes.
I really want to get it right.
Regards
Peder
They do look similar but I am afraid they wont fit. The Turbo Cup brackets hole pattern is a bit curved to match the holes in the seat when adjusting between the holes.
I really want to get it right.
Regards
Peder
12-06-2015, 02:43 PM
#677
AutoX
Join Date: Jun 2012
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Hello
A friend of mine made an autocad drawing of his 964 RS brackets. I can send you this, not sure if they are the same though, but I used the drawings to make reproductions for the 968 CS that I had a few years ago and that worked out fine.
Regards
Kristof
A friend of mine made an autocad drawing of his 964 RS brackets. I can send you this, not sure if they are the same though, but I used the drawings to make reproductions for the 968 CS that I had a few years ago and that worked out fine.
Regards
Kristof
12-06-2015, 03:03 PM
#678
Rennlist Member
Rothmans one for sale:
http://www.ebay.com/itm/181946739011?rmvSB=true
http://www.ebay.com/itm/181946739011?rmvSB=true
12-06-2015, 03:46 PM
#679
Rennlist Member
Regards
Peder.
12-06-2015, 03:49 PM
#680
Rennlist Member
Would be a bit expensive to buy a whole car to get the brackets
12-28-2015, 05:30 PM
#682
Rennlist Member
Mag Turbo Cup teledials for sale
At a pretty decent price aswell!
http://suchen.mobile.de/fahrzeuge/de...o&pageNumber=2
By the way! Very nice car and gathering Paul!
/Peder
http://suchen.mobile.de/fahrzeuge/de...o&pageNumber=2
By the way! Very nice car and gathering Paul!
/Peder
01-20-2016, 10:29 PM
#683
Rennlist Member
'88 Rothmans Cup for sale : http://www.racingjunk.com/GT/1826166...hmans-Cup.html
$69,500.00
1988 Porsche 944 Turbo Rothmans Cup
Factory built race car - lightweight trim with more than 50 changes from street version.
1.Matter Roll cage, Recaro Seat, Lightweight carpet interior, Sports passenger seat
2. Upgrade Bilstein coil over suspension, includes race only suspension piedes, magnesium wheels w 4 piston calipers,
Big Brakes,Stiffer sway bars - Front and Rear, Front shock tower brace and lowered ride height
3.Lightening Inc fiberglass hood, magnesium transmission cover, no sun roof, lexan windshield, lt weight doors,
reinforced body structure, 2560lb in race trim.
4.Engine includes new higher output intercooler turbo, ceramic intake manifold,(range is +/-30hp to +80hp),
straight thru 4"Walker exhaust, Revised Motronic system adds considerable torque and a lot more hp!
Range is +/-30hp to +80hp
5.Ltd slip differential along racing gears and a racing clutch.
6. Porsche certificate of Authenticitry
Car in excellent condition overall - mechanically, suspension, paint all recently freshened / updated.
Car currently at Bach Racecraft in Verona, WI
1988 Porsche 944 Turbo Rothmans Cup
Factory built race car - lightweight trim with more than 50 changes from street version.
1.Matter Roll cage, Recaro Seat, Lightweight carpet interior, Sports passenger seat
2. Upgrade Bilstein coil over suspension, includes race only suspension piedes, magnesium wheels w 4 piston calipers,
Big Brakes,Stiffer sway bars - Front and Rear, Front shock tower brace and lowered ride height
3.Lightening Inc fiberglass hood, magnesium transmission cover, no sun roof, lexan windshield, lt weight doors,
reinforced body structure, 2560lb in race trim.
4.Engine includes new higher output intercooler turbo, ceramic intake manifold,(range is +/-30hp to +80hp),
straight thru 4"Walker exhaust, Revised Motronic system adds considerable torque and a lot more hp!
Range is +/-30hp to +80hp
5.Ltd slip differential along racing gears and a racing clutch.
6. Porsche certificate of Authenticitry
Car in excellent condition overall - mechanically, suspension, paint all recently freshened / updated.
Car currently at Bach Racecraft in Verona, WI
05-19-2016, 02:46 AM
#686
Advanced
Join Date: Feb 2014
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
I run a 89' Turbo S and was wondering if anyone would know how to find the DME and KLR chips that were used? I know that they made about 275hp and that is where I need to be for my class pwr/wt limits. If someone even just had a p/n for the units that would be helpful!
TIA
TIA
07-05-2016, 10:30 AM
#690
Rennlist Member
Thread Starter
Bought my Turbo Cup car 29 years ago this weekend- bought it from Porsche Motorsport North America, which was Holbert at the time. Flew to PA with a buddy and drove it home, roll cage and all.
29 years, yikes!
.
29 years, yikes!
.
The following users liked this post:
fc-racer (05-31-2020)