My Trailer Diary
#331
Rennlist Member
#332
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
look at pjs 24' hitch receviever on the TPD, it's for 30,000 lbs. i tend to over due things hahaha
#333
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
sorry dude, your track maps are not of the same scale and the big poster needs to have more tapes, it's not FLAT...
you need a pulley next to cloth hanger than i can remote winch max and hang him on the hanger should he misbehave again.
you need a pulley next to cloth hanger than i can remote winch max and hang him on the hanger should he misbehave again.
#338
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#339
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Wow, that's much more "real estate" than expected!
Your pic sorta reminds me of my local Discount Tire...lots of racks and lots of tires...nice!
Thanks for the pic Mooty; I was thinking folks here were referring to the 2 wheeled dolly version to load/carry "only" 4 wheels/tires. Your pic blew me away.
You must run through lots of......nitrogen...
Your pic sorta reminds me of my local Discount Tire...lots of racks and lots of tires...nice!
Thanks for the pic Mooty; I was thinking folks here were referring to the 2 wheeled dolly version to load/carry "only" 4 wheels/tires. Your pic blew me away.
You must run through lots of......nitrogen...
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#340
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
u can buy it in kit from, supply own horizontal so it's narrower or u can ave them build it with shorter horizontals
#341
Rennlist Member
#342
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
well... since I don't have a trk car, I got to have something to show!
the fastest tire rack out west.
the fastest tire rack out west.
#343
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Poor man's version- $150ish
Rock N Roller Multicart Model R8 Mid by Rock-N-Roller Permalink: http://amzn.com/B003AYL92G
500 pound capacity- rollers with locks on front casters- You can adjust the length easily. It transforms into a million different configurations without tools. Did I mention $150?
I did not want shore beams, or a tire rack in my new trailer due to the fact everyone knocks themselves out on them. Then you have to unload them all the time. I figured I needed a cart, but not those stupid expensive ones. I found this and it works perfectly.
They even make different sizes if you want to carry even more/less, but they all have adjustments.
Mine is the R8 and I just tie it down to some D rings in the rear. It is not going anywhere. Those are 275/50 R15's and 245/50 R15's Hoosier R6's for scale.... Heavy bitches.
Rock N Roller Multicart Model R8 Mid by Rock-N-Roller Permalink: http://amzn.com/B003AYL92G
500 pound capacity- rollers with locks on front casters- You can adjust the length easily. It transforms into a million different configurations without tools. Did I mention $150?
I did not want shore beams, or a tire rack in my new trailer due to the fact everyone knocks themselves out on them. Then you have to unload them all the time. I figured I needed a cart, but not those stupid expensive ones. I found this and it works perfectly.
They even make different sizes if you want to carry even more/less, but they all have adjustments.
Mine is the R8 and I just tie it down to some D rings in the rear. It is not going anywhere. Those are 275/50 R15's and 245/50 R15's Hoosier R6's for scale.... Heavy bitches.
#345
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I built a rack a few years back, holds 2 sets of tires, nitrogen bottle, 2 jacks and stands. Pretty easy project for anyone with a welder:
https://rennlist.com/forums/5155103-post6.html
https://rennlist.com/forums/5155103-post6.html