Macan Coding
#151
https://docs.google.com/spreadsheets...it?usp=sharing
#152
Burning Brakes
Thread Starter
The settings are documented in this spreadsheet:
https://docs.google.com/spreadsheets...it?usp=sharing
https://docs.google.com/spreadsheets...it?usp=sharing
The following users liked this post:
Lvispl (12-20-2021)
#154
Longer answer that sounds snarky but isn't meant to be: Refer to Column E for a description of each setting: "Disable seatbelt warning Chime"
#155
The settings are documented in this spreadsheet:
https://docs.google.com/spreadsheets...it?usp=sharing
https://docs.google.com/spreadsheets...it?usp=sharing
#156
Drifting
The settings are documented in this spreadsheet:
https://docs.google.com/spreadsheets...it?usp=sharing
https://docs.google.com/spreadsheets...it?usp=sharing
#157
Look here at the section that sierra055 started:
https://www.macanforum.com/threads/p...8#post-2638038
Also - the spreadsheet is not mine, it was started by @sterod , and many of us have had a hand in maintaining it. Just wanted to give credit where credit was due.
The following 2 users liked this post by runbuh:
Lvispl (12-20-2021),
sebastianPT (06-03-2021)
The following users liked this post:
runbuh (06-01-2021)
#159
Awesome--thank you to you, @sterod , and everyone else that contributed! Along that line, might you or anyone else know how to activate Lane Keep Assist (LKA) via an X431? I already have Lane Departure Warning (LDA), Lane Change Assist (LCA), Nav, etc., and know @don16 did it with a PIWIS III, but not sure what modules are involved in order to code it with an X431. Thanks again!
#160
Awesome--thank you to you, @sterod , and everyone else that contributed! Along that line, might you or anyone else know how to activate Lane Keep Assist (LKA) via an X431? I already have Lane Departure Warning (LDA), Lane Change Assist (LCA), Nav, etc., and know @don16 did it with a PIWIS III, but not sure what modules are involved in order to code it with an X431. Thanks again!
#161
Awesome--thank you to you, @sterod , and everyone else that contributed! Along that line, might you or anyone else know how to activate Lane Keep Assist (LKA) via an X431? I already have Lane Departure Warning (LDA), Lane Change Assist (LCA), Nav, etc., and know @don16 did it with a PIWIS III, but not sure what modules are involved in order to code it with an X431. Thanks again!
#162
AutoX
For anyone interested in getting the coolant gauge to read real time coolant temps, see here https://rennlist.com/forums/991/1283...t-the-fix.html
I made the same changes to my 2015 Macan Turbo a few days ago.
Pic below shows: left side Temps the gauge will show, right side actual coolant Temps.
To correct this I copied the X2 - X8 values over to the corresponding Y2 - Y8 fields
And adaptive brake lights. Brakes flash if the car sense a deceleration rate of -81.gs to .71 gs deceleration.
*Brakes Lights are currently set to flash for 2 seconds but that will be reduced to 1 sec.
I made the same changes to my 2015 Macan Turbo a few days ago.
Pic below shows: left side Temps the gauge will show, right side actual coolant Temps.
To correct this I copied the X2 - X8 values over to the corresponding Y2 - Y8 fields
And adaptive brake lights. Brakes flash if the car sense a deceleration rate of -81.gs to .71 gs deceleration.
*Brakes Lights are currently set to flash for 2 seconds but that will be reduced to 1 sec.
Last edited by kapetajr; 04-13-2022 at 04:23 PM.
The following users liked this post:
Pablos007 (08-25-2022)
#164
Intermediate
Enable as in if the vehicle does not already have sport Plus, no, that is an online activation code that must be purchased through Porsche.
If the vehicle already has Sports plus then yes you can use the x431 to configure the diamond button to activate it
If the vehicle already has Sports plus then yes you can use the x431 to configure the diamond button to activate it
The following users liked this post:
kapetajr (05-17-2022)