When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Modernize your P-Car w/ Mr12Volt. Apple Carplay and Android Auto with superior audio quality, features, and support. Reach out for specials! Torque.Acs@gmail.com or Roman (267) 317-8229
I've just brought this up with the manufacturer. Lays yet to get this resolved.
just fyi, I have reached out to Mr12Volt last week and they sent their latest software update zip file. I have applied it but still see the same issue. below is what I have after the update.
Hello, I am trying to install on my 2010 Cayenne GTS and have followed all instructions provided but I cannot place the actual mr12volt box in the "cubby" shown in online tutorial videos. There is a solid metal piece of some kind blocking it. I cannot find answers to this anywhere on the internet. Would appreciate any help of where to store the device, thanks.
Hello, I am trying to install on my 2010 Cayenne GTS and have followed all instructions provided but I cannot place the actual mr12volt box in the "cubby" shown in online tutorial videos. There is a solid metal piece of some kind blocking it. I cannot find answers to this anywhere on the internet. Would appreciate any help of where to store the device, thanks.
If this kit was bought through me and you selected that you had sat then I included extra hardware for you.
Yes I did get the extra standoffs and am currently using them to place the mr12volt switching board on top of the xm board. I do see however when I go to screw the PCM back together it is very tight and compresses the ribbons quite hard. Is this to be expected? Don't want to break them but I don't see how I could make more room.
One additional question. My Cayenne has satellite radio so I am installing the Mr12volt switchboard over the XM board with the extra standoffs. However when I do this and go to close the PCM unit back up the fit is super tight and it looks like the ribbons are being compressed down quite hard. Is this to be expected? I don’t want to break anything.
One additional question. My Cayenne has satellite radio so I am installing the Mr12volt switchboard over the XM board with the extra standoffs. However when I do this and go to close the PCM unit back up the fit is super tight and it looks like the ribbons are being compressed down quite hard. Is this to be expected? I don’t want to break anything.
08-14-2024 | 07:29 AM
