Vcds How to
#106
I feel I need to elaborate on my comments to date. I have been a rusted on VCDS user for years so have become accustomed to that process. I did contact iCarSoft for assistance when I wasn't getting what I expected and I have to make a big call out to support for taking the time to go over my logs and provide a software update. Just waiting for a break in the weather to do another scan with the updated software to see if there are any differences.
Using the earlier software so far although the PDCC module is listed in the scanner, it doesn't connect and shows as "not fitted" when it certainly is. Level control shows as fitted but there were no readings for levels and pressures etc.
First thing is to do another manual scan (the bit I wouldn't need to do with VCDS) to see if anything has changed. Will report back if there is anything of value.
Using the earlier software so far although the PDCC module is listed in the scanner, it doesn't connect and shows as "not fitted" when it certainly is. Level control shows as fitted but there were no readings for levels and pressures etc.
First thing is to do another manual scan (the bit I wouldn't need to do with VCDS) to see if anything has changed. Will report back if there is anything of value.