What did you do to your 997 today?
#8311
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Wasn’t trying to scare you. Replied to your pm. Just more of a pain since you are in the back, trying to fit the seat belt reel into a smaller area. At the end of the day it’s just nuts and bolts being taken out and put back in.
#8313
Complete detail (clay and chemical decontamination, polish, Ceramic Pro Sport installation, interior), new side stone guards and Porsche center caps on the Fuchs.
Car: 2010 C4S 6spd
Car: 2010 C4S 6spd
The following users liked this post:
mavfan909 (07-21-2020)
#8314
Three Wheelin'
Changed the oil and indulged in a guilty pleasure.
#8316
Pro
I adjusted my parking brake shoes (had 12 clicks before solid engagement, got it down to a nice tight 8 clicks) by jacking up one wheel at a time and removing one lug bolt. Then I used a narrow long flat blade screwdriver to turn the wheel to binding then backed off 4 clicks. It was easier than expected.
Then I have her a bath and took her out for a brisk drive where we stopped at a park to take some pix.
#8317
Installed new rotors & pads that I bought 5yrs ago. Ha. 62,xxx mi
Bleed the lines and not the slave cuz I got a new clutch about a year ago and surely my indy did?
Really a pleasure working on well maintained cars. Things disassemble and assemble as they should, antisieze and proper torques.
Couple of sensor hacks for the front.
Very easy with all the diy's Thank You RL !!!
Bleed the lines and not the slave cuz I got a new clutch about a year ago and surely my indy did?
Really a pleasure working on well maintained cars. Things disassemble and assemble as they should, antisieze and proper torques.
Couple of sensor hacks for the front.
Very easy with all the diy's Thank You RL !!!
#8318
Rennlist Member
#8319
I'm assuming these Fuchs are replicas? If so can you tell me the model name or company? They look awesome!
#8320
Front Bumper Holes
It's been now 2 weeks with my 997.2 C4S and I had to pull that front plate off the bumper. You see I bought the car in Ontario whereas Quebec has no front plate requirement. I now have 4 small holes which I need to macgiver a solution. They're not totally unbearable but repainting the front bumper seems extreme $$. Any other solutions to provide ?
#8321
Rennlist Member
It's been now 2 weeks with my 997.2 C4S and I had to pull that front plate off the bumper. You see I bought the car in Ontario whereas Quebec has no front plate requirement. I now have 4 small holes which I need to macgiver a solution. They're not totally unbearable but repainting the front bumper seems extreme $$. Any other solutions to provide ?
The following users liked this post:
mavfan909 (07-21-2020)
#8322
#8323
Advanced
Ordered previously loved center vent from eBay. Finish on the original one was wrinkling and peeling. Anyone else have this issue?
#8324
Rennlist Member
It's been now 2 weeks with my 997.2 C4S and I had to pull that front plate off the bumper. You see I bought the car in Ontario whereas Quebec has no front plate requirement. I now have 4 small holes which I need to macgiver a solution. They're not totally unbearable but repainting the front bumper seems extreme $$. Any other solutions to provide ?
However, if that hadn't been done, I most likely would have bought a european license plate custom made with my Quebec license plate number.
#8325
Advanced
Installed a QI wireless charging phone cradle with a proclip mount. Perfect combination. No visible wires, keeps Waze in my line of sight and most importantly, very sturdy and secure. Installed new air filters. Also gave the grimy engine bay a hand bath. Might do a more comprehensive wash later but much improved for now.