When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just got my MOD pack from Rennline (GT3 Smile Kit and mesh screens) just need to wait for the center RAD kit to arrive and the car to be finished at the at Sun Motors, they are trying to resolve some issues I have with the PCM.
Convertible top treatment over last 2 days. Bought the Porsche products, washed the top yesterday morning and let it dry all day and overnight. Lightweight painters tarps and 3M painters taped the car. Used a lint roller to make sure I didn't capture any extra dust then alternately sprayed the seams and top until the can was empty. It's drying right now.
Later today, I hope to remove the airbag decals from the leather visors and will condition the seats and the interior with the Porsche leather product.
Wrapped my driver side door sill as it was very scratched up. I chose wrap over paint because I had extra 3M 1080 M12 Matte Black vinyl laying around and it was an exact match to the existing plastic. Since you can take out the switches the wrap is about as basic as you can get.
End result is you can't tell it is wrapped and it looks much better than before.
Wrapped my driver side door sill as it was very scratched up. I chose wrap over paint because I had extra 3M 1080 M12 Matte Black vinyl laying around and it was an exact match to the existing plastic. Since you can take out the switches the wrap is about as basic as you can get.
End result is you can't tell it is wrapped and it looks much better than before.
Well done. My sills need some attention too. Small stuff but it makes a difference.
Installed my PCA Club plates. Been waiting since last June for the minimum 200 orders to be placed before production could begin. Used tamper-proof screws just in case....
Installed my PCA Club plates. Been waiting since last June for the minimum 200 orders to be placed before production could begin. Used tamper-proof screws just in case....
Now that's how you make one of the best looking plates in the union even better -
Wrapped my driver side door sill as it was very scratched up. I chose wrap over paint because I had extra 3M 1080 M12 Matte Black vinyl laying around and it was an exact match to the existing plastic. Since you can take out the switches the wrap is about as basic as you can get.
End result is you can't tell it is wrapped and it looks much better than before.
Installed my PCA Club plates. Been waiting since last June for the minimum 200 orders to be placed before production could begin. Used tamper-proof screws just in case....
Installed bolster covers for the LWBS as I am on a 3,000 mile road trip. Thanks to Crazy Eddie for the thread samples to verify the thread color and for shipping the covers to our first stop on the trip in Indianapolis. First cover took about 15 minutes to install, the second about 2. The bolsters appreciate such a nice coat.
Installed my PCA Club plates. Been waiting since last June for the minimum 200 orders to be placed before production could begin. Used tamper-proof screws just in case....
05-23-2018 | 03:33 PM
