UMW STG3A ZC Breaks New Ground: Dyno Sheet
03-21-2007, 01:48 AM
#76
Pro
Thread Starter
Join Date: Aug 2005
Location: Michigan
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pics from the UMW head project. The finished port is on the exhaust side. The unfinished is from the intake and is used to show just how rough the casting is in stock form. There will not be any pics posted of the intake side, but the exhaust side shows the work required to get 300+ cfm flow. The head ports are all port matched to the gaskets as well so there is no excess gasket material that will impede airflow. We are very close. Kevin
Last edited by KPG; 03-21-2007 at 03:29 PM.
03-21-2007, 09:22 AM
#77
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
That looks awesome, Kevin! Very nice work.
__________________
991.2 GT3 RS Weissach Racing Yellow
991.2 Turbo S GT Silver
991.2 GT3 Chalk (Manual)
2022 Cayenne White
former 1972 911T white, 1984 911 3.2 Targa black, 993 cab white, 993TT arena red, 993TT silver, 996TT speed yellow, 991.1 GT3 white
www.speedtechexhausts.com
info@speedtechexhausts.com
Testimonials SpeedTech Exhaust Videos facebook
991.2 GT3 RS Weissach Racing Yellow
991.2 Turbo S GT Silver
991.2 GT3 Chalk (Manual)
2022 Cayenne White
former 1972 911T white, 1984 911 3.2 Targa black, 993 cab white, 993TT arena red, 993TT silver, 996TT speed yellow, 991.1 GT3 white
www.speedtechexhausts.com
info@speedtechexhausts.com
Testimonials SpeedTech Exhaust Videos facebook
