Repairing the “black foam coming out of vent” issue
#136
RL Community Team
Rennlist Member
Rennlist Member
I’ll do it the two Rennlist methods for just $2500.
The following users liked this post:
wdb (01-28-2022)
#138
Rennlist Member
I did this job today. Very helpful post. Thank you!
#140
Rennlist Member
Haha. Compared to AOS it’s not bad. Hardest part was lining up the upper bent door tab on reinstall.
The hacksaw approach didn’t work for me. Ended up using a dremel to access the upper bent door tab.
The lower tab was very easy to access. I found it easiest to just remove the arm that attaches to the lower tab. That way the tab was already lined up for reinstall.
1/2 day project as a first timer.
The steps and pics were very helpful to me.
The hacksaw approach didn’t work for me. Ended up using a dremel to access the upper bent door tab.
The lower tab was very easy to access. I found it easiest to just remove the arm that attaches to the lower tab. That way the tab was already lined up for reinstall.
1/2 day project as a first timer.
The steps and pics were very helpful to me.
#141
Rennlist Member
I wish there was someone near me who would do this
#143
Rennlist Member
#144
Rennlist Member
#147
Rennlist Member
Dranon that would be a pleasure I have a place near me that’s got the best Italian food on the planet and a steakhouse that makes phenomenal beef Wellington
#148
Three Wheelin'
Really? I didn't think it was that bad all things considering. It was the first time I had touched any of this stuff on my 911 and I think it took me about 3 hours. It is a pain to get the cap off the top to release the door. What worked for me was a sawzall blade used like you would see lumberjacks on a giant tree saw back and forth. The actuator arm on the bottom tripped me up because I didn't take a pic of how it went in and it was disorienting since I was upside down. I ended up putting it on wrong and had to remove and reinstall it. I will say it's been something like 2 years and it's still holding up great.
#149
Rennlist Member
#150
Rennlist Member
Gotta wait til it gets a little warmer!