The "Ultimate AOS Solution"
#571
Rennlist Member
Thread Starter
The cost of Anodizing is minimal to the cost of Aluminum CNC reductive manufacturing. And clear Anodizing is the same price as black Anodizing.
The additive manufacturing process takes 18hrs on a 10k machine, the reductive process can be done much faster, but is done on an 80k+ machine..
Last edited by Porschetech3; 06-27-2020 at 02:52 PM.
#572
RL Community Team
Rennlist Member
Rennlist Member
Skip,
After thinking about, make mine black.
After thinking about, make mine black.
#573
Rennlist Member
Thread Starter
#574
Rennlist Member
Thread Starter
6061 CNC'd Rear cover/backing plate/bracket assembly
The following users liked this post:
kwright997 (06-27-2020)
#575
Rennlist Member
Thread Starter
First Elite UAOS Accumulator assembled, sealed, test fitted, to make sure everything is as it should be. This one is un-anodized raw 6061 aluminum. These will be an upgrade option, and a direct retrofit for the Carbon Fiber/Nylon Accumulators, and also included as part of the "Elite Version UAOS kit'..
t"..
t"..
Last edited by Porschetech3; 07-03-2020 at 06:00 PM.
The following 2 users liked this post by Porschetech3:
SoundnSpeed (07-03-2020),
yaz996 (07-02-2020)
The following users liked this post:
Porschetech3 (07-02-2020)
#577
Rennlist Member
I like the new aluminum one's, but being in California and doing smog checks every other year, I am going to stay with the composite one looking like OEM fix.
The following 2 users liked this post by JohnCA58:
Porschetech3 (07-03-2020),
sgt1372 (07-22-2020)
#578
Rennlist Member
Thread Starter
#579
RL Community Team
Rennlist Member
Rennlist Member
That’s beautiful!
The following users liked this post:
Porschetech3 (07-03-2020)
The following users liked this post:
Porschetech3 (07-22-2020)
#581
Rennlist Member
Thread Starter
Last edited by Porschetech3; 07-22-2020 at 11:23 AM.
#582
Rennlist Member
Thread Starter
I found this recent article on m96 Hydrolock, seems others are figuring out it has caused more problems than previously believed..but I am the only one with the CURE.... https://www.996revolution.com/hydrolock.html
Last edited by Porschetech3; 07-22-2020 at 12:25 PM.
The following 2 users liked this post by Porschetech3:
808Bill (07-22-2020),
islaTurbine (07-24-2020)
#583
Rennlist Member
Thread Starter
The following users liked this post:
SoundnSpeed (07-24-2020)
#585
Rennlist Member
Thread Starter