What did you do with your 993 today
#1397
Burning Brakes
Completed some updates:
-BBi RS uprights
-Full monoball suspension bushings
-Full Tarret/Rennline arms
-solid subframe mounts
-KW V3 coilovers (and all the bits needed to fit them to the car)
-Rennline top mounts, camber plates, bushings, etc.
-SS brake lines
-Painted calipers to match the car
-Rebuilt the steering rack
-RS sways & end links
-SS clutch bleed line run into the engine bay
-RS heater bypass tube
-Removed rear window wiper properly (new glass, removed all wiper bits, recovered parcel shelf)
-New tires
-Alignment & corner balance
-Some PDR ding removal
Car feels good, went from crappy handling with lots of bump steer to crisp handling with excellent turn-in response. Haven't had time to really shake it down yet, nor to take any pictures, but I'll post some up soon.
-BBi RS uprights
-Full monoball suspension bushings
-Full Tarret/Rennline arms
-solid subframe mounts
-KW V3 coilovers (and all the bits needed to fit them to the car)
-Rennline top mounts, camber plates, bushings, etc.
-SS brake lines
-Painted calipers to match the car
-Rebuilt the steering rack
-RS sways & end links
-SS clutch bleed line run into the engine bay
-RS heater bypass tube
-Removed rear window wiper properly (new glass, removed all wiper bits, recovered parcel shelf)
-New tires
-Alignment & corner balance
-Some PDR ding removal
Car feels good, went from crappy handling with lots of bump steer to crisp handling with excellent turn-in response. Haven't had time to really shake it down yet, nor to take any pictures, but I'll post some up soon.
#1398
Completed some updates:
-BBi RS uprights
-Full monoball suspension bushings
-Full Tarret/Rennline arms
-solid subframe mounts
-KW V3 coilovers (and all the bits needed to fit them to the car)
-Rennline top mounts, camber plates, bushings, etc.
-SS brake lines
-Painted calipers to match the car
-Rebuilt the steering rack
-RS sways & end links
-SS clutch bleed line run into the engine bay
-RS heater bypass tube
-Removed rear window wiper properly (new glass, removed all wiper bits, recovered parcel shelf)
-New tires
-Alignment & corner balance
-Some PDR ding removal
Car feels good, went from crappy handling with lots of bump steer to crisp handling with excellent turn-in response. Haven't had time to really shake it down yet, nor to take any pictures, but I'll post some up soon.
-BBi RS uprights
-Full monoball suspension bushings
-Full Tarret/Rennline arms
-solid subframe mounts
-KW V3 coilovers (and all the bits needed to fit them to the car)
-Rennline top mounts, camber plates, bushings, etc.
-SS brake lines
-Painted calipers to match the car
-Rebuilt the steering rack
-RS sways & end links
-SS clutch bleed line run into the engine bay
-RS heater bypass tube
-Removed rear window wiper properly (new glass, removed all wiper bits, recovered parcel shelf)
-New tires
-Alignment & corner balance
-Some PDR ding removal
Car feels good, went from crappy handling with lots of bump steer to crisp handling with excellent turn-in response. Haven't had time to really shake it down yet, nor to take any pictures, but I'll post some up soon.
#1399
Rennlist Member
Went for a group drive this past weekend with a 1 of 1 green F40.
#1400
PS Armorer
Rennlist Member
Rennlist Member
Ordered some new Forgelines. Thanks BGB!
#1401
Swapped out the Standard AirBox for a FVD & BMC Cone Combo..
UInfortunately, was pretty sick with the Flu, so didn;t head out after fitment to see/hear/feel the difference.. I went straight back to bed..! This coming weekend though, a Drive is planned..
UInfortunately, was pretty sick with the Flu, so didn;t head out after fitment to see/hear/feel the difference.. I went straight back to bed..! This coming weekend though, a Drive is planned..
#1402
#1403
Rennlist Member
Finally got around to installing the GMorat bumperette plugs today. Turned out pretty good and should hold me
over until I get them properly filled some day. Thanks GMorat for having these 3d printed
over until I get them properly filled some day. Thanks GMorat for having these 3d printed
#1405
Rennlist Member
Feel better!
#1406
Rennlist Member
Finally set-up my new Quick Jack lift yesterday and started turning wrenches: started prep for SAI clean-out by dropping heat exchangers, replaced bottom spark plugs, and polished a few bits while I wait for a few new parts.
#1408
Drifting
Y E A H Y E A H ! my favourites anyway...