What did you do with your 993 today
#3961
Rennlist Member
Big ovals
i have a DACH x-pipe that replaced the catalyst (still have that) and the alignment because of the X-pipe makes the passenger tip stick about 1/2 “ farther out but later I’ll modify the tube leaving the passenger side OEM “gutted” muffler can (also made by the DACH dude) to address that.
before and after pics attached.
you have to love the German term for exhaust tip 😊
tomorrow my poly RS sideskirts from Better Bodies get here 🤤
#3962
Rennlist Member
replaced my Motorsound tips with OEM 993 big ovals from Gert in Belgium. I will clean up the Motorsound tips and upload for cheap sale.
i have a DACH x-pipe that replaced the catalyst (still have that) and the alignment because of the X-pipe makes the passenger tip stick about 1/2 “ farther out but later I’ll modify the tube leaving the passenger side OEM “gutted” muffler can (also made by the DACH dude) to address that.
before and after pics attached.
you have to love the German term for exhaust tip 😊
tomorrow my poly RS sideskirts from Better Bodies get here 🤤
i have a DACH x-pipe that replaced the catalyst (still have that) and the alignment because of the X-pipe makes the passenger tip stick about 1/2 “ farther out but later I’ll modify the tube leaving the passenger side OEM “gutted” muffler can (also made by the DACH dude) to address that.
before and after pics attached.
you have to love the German term for exhaust tip 😊
tomorrow my poly RS sideskirts from Better Bodies get here 🤤
The following users liked this post:
993Porsche (05-28-2023)
#3963
Rennlist Member
thanks!
they do look great but I am on the slippery slope of continually adding RS parts to this RS clone and the RS came with wide ovals
they are in good shape, I polished them and listed on the member sale forum and hopefully someone can use them.
they do look great but I am on the slippery slope of continually adding RS parts to this RS clone and the RS came with wide ovals
they are in good shape, I polished them and listed on the member sale forum and hopefully someone can use them.
Last edited by DB_NC_95C2; 05-27-2023 at 02:34 PM. Reason: listed Motorsound for sale
#3965
Rennlist Member
New to me 993. New Bilstein, replaced all engine belts, new tires, alignment, flushed and bleed brake system, replace front and rear hood struts, oil and filter, replace tail pipes and replaced air cover. Fister 2 coming next week.
The following 5 users liked this post by Runner:
c2_peter (05-26-2023),
dalves11 (05-26-2023),
sacman (05-27-2023),
schroederhc1 (06-03-2023),
VladiD (05-26-2023)
#3968
Rennlist Member
I received a new Quickjack and hooked it up today in the hopes of installing the Fister SSK and Goldenrod in my car and to my disappointment, one of the female quick connects of the hydraulic line won't engage with the male connector. I ordered a replacement from Summit, but it won't come until Thursday. Meh.
#3969
Rennlist Member
Changed the oil today. Even with a lift (4 post though) it's a bit of a deal with the 993 with the two filters, 2 drain plugs and lots of stuff in the way... So much easier on my other cars.
My kids were also not very helpful...
My kids were also not very helpful...
The following 7 users liked this post by RudyP:
993Porsche (05-28-2023),
ClassicAndy (05-29-2023),
jfischet (05-29-2023),
kkswow12 (05-29-2023),
Mark Dreyer (06-03-2023),
and 2 others liked this post.
#3970
Rennlist Member
The following 4 users liked this post by VladiD:
#3971
New Interstate battery and back on the road! Going to put the twists back on in a few weeks.
Last edited by Onami; 05-29-2023 at 03:49 PM.
The following 2 users liked this post by Onami:
M. Schneider (06-07-2023),
RockstarBruski (05-30-2023)
#3972
Last edited by RockstarBruski; 05-30-2023 at 09:41 PM.
The following 2 users liked this post by RockstarBruski:
M. Schneider (06-07-2023),
Watson (06-05-2023)
#3974
Rennlist Member
My C4S came with a turbo tail from prior ownership (not sure if Nurburger put it on or someone before) but either way, I love the turbo tail... But I also love the C2S split grille. Lucky for me, Nurburger was kind enough to include a C4S and C2S decklid when I bought the car from him 11+ years ago and I've been meaning to get them painted the correct color to have options. I finally got around to it and put on the C2S decklid today and it looks great!
Last edited by RudyP; 06-03-2023 at 12:28 AM.
#3975
Rennlist Member
Join Date: Oct 2007
Location: Racking up air miles....
Posts: 3,734
Likes: 0
Received 663 Likes
on
278 Posts
My C4S came with a turbo tail from prior ownership (not sure if Nurburger put it on or someone before) but either way, I love the turbo tail... But I also love the C2S split grille. Lucky for me, Nurburger was kind enough to include a C4S and C2S decklid when I bought the car from him 11+ years ago and I've been meaning to get them painted the correct color to have options. I finally got around to it and put on the C2S decklid today and it looks great!
I can't imagine why you would ever take the C2S lid off again - it looks absolutely amazing. Enjoy!
The following users liked this post:
RudyP (06-03-2023)