What did you do with your 993 today
The following 17 users liked this post by ClassicAndy:
1997hmc993 (02-14-2022),
911F1 (02-14-2022),
alsamrob4 (02-14-2022),
anguilla1980 (02-13-2022),
asj262 (02-14-2022),
and 12 others liked this post.
The following 8 users liked this post by NB 993:
anguilla1980 (02-13-2022),
AX993 (02-14-2022),
c2_peter (02-14-2022),
dantonio (02-14-2022),
max911 (02-14-2022),
and 3 others liked this post.
#3378
I had a busy and productive weekend.
Picked up my 993 on Friday. It was in the shop getting a the steering rack rebuilt and then a subsequent alignment. It was in there for a few months due to some supply chain issues with some of the seals they needed. Picked it up right before the snow hit heavy. Good timing. But I did have my 17" Cup IIs with Sottozero3s on.
And then on Saturday, a friend and I installed some new Recaro Experts:
And then on Sunday, went over to my other friend's house that has a 96 C2 and we put in Fister short shift kits:
Need to do an oil change and change out a broken rocker panel and a door seal. 10 years in, here's to the next 10.
Picked up my 993 on Friday. It was in the shop getting a the steering rack rebuilt and then a subsequent alignment. It was in there for a few months due to some supply chain issues with some of the seals they needed. Picked it up right before the snow hit heavy. Good timing. But I did have my 17" Cup IIs with Sottozero3s on.
And then on Saturday, a friend and I installed some new Recaro Experts:
And then on Sunday, went over to my other friend's house that has a 96 C2 and we put in Fister short shift kits:
Need to do an oil change and change out a broken rocker panel and a door seal. 10 years in, here's to the next 10.
The following 7 users liked this post by RocketJohn:
911F1 (02-14-2022),
asj262 (02-14-2022),
AX993 (02-14-2022),
c2_peter (02-14-2022),
ClassicAndy (02-14-2022),
and 2 others liked this post.
#3379
Instructor
No, I did not get the "Porsche" label. Maybe I should have.
#3380
Instructor
^ this deserves its own thread or at least belongs in a conti install thread so it’s easy to locate for others looking to do this install! Nice work.
Btw did you get a sticker to go over top of the conti branding?
https://www.bergvillfx.com/products/porsche-sticker
Btw did you get a sticker to go over top of the conti branding?
https://www.bergvillfx.com/products/porsche-sticker
Q2. How to link this post at "Installing The Continental TR7412UB-OR Radio"?
Or should I post the entire post again at "Installing The Continental TR7412UB-OR Radio"?
Thanks.
Last edited by 1997hmc993; 02-14-2022 at 04:59 PM.
#3381
Instructor
The following 3 users liked this post by 1997hmc993:
#3382
Instructor
Can you post pics of other angles, top, bottom, left, right, and back?
I have not seen any backside pic of 993 Vario engine.
Sorry for asking so many!
I have not seen any backside pic of 993 Vario engine.
Sorry for asking so many!
Last edited by 1997hmc993; 02-14-2022 at 05:15 PM.
#3383
Racer
I just want to know what the dyno numbers were
The following 2 users liked this post by ClassicAndy:
1997hmc993 (02-15-2022),
anguilla1980 (02-14-2022)
#3385
Beautiful build! Not sure if you’re willing to share the cost and the exact components to build this beauty. Looking to do something similar in the future.
#3386
Instructor
Thank you.
So Nice!
I drive my 97 993 every single day no matter what the weather is.
But, with this clean engine, I can imagine giving up driving and admire the engine in my living room.
So Nice!
I drive my 97 993 every single day no matter what the weather is.
But, with this clean engine, I can imagine giving up driving and admire the engine in my living room.
The following users liked this post:
c2_peter (02-15-2022)
The following users liked this post:
ClassicAndy (02-17-2022)
#3389
Rennlist Member
Day 3 North Atlanta Custom’s
Full Monty, Ceramic coat, Xpel, Wheels, Engine bay, interior, and undercarriage
The following 2 users liked this post by schroederhc1:
anguilla1980 (02-15-2022),
c2_peter (02-16-2022)