993 Project continues - Going Wide
#151
King of Cool
Rennlist Member
Rennlist Member
#152
Rennlist Member
Thread Starter
Received the BBS E88s today from Viggo
The rear centers will get blasted and powder coated with black.
The fronts are 10.5x18" and rears 13x18"
And had to test fit them of course:
The rear centers will get blasted and powder coated with black.
The fronts are 10.5x18" and rears 13x18"
And had to test fit them of course:
#154
Rennlist Member
Thread Starter
here's the "build sheet":
ENGINE
m20B27ETA Block (2.3mm shaved off)
m20B27ETA Crankshaft
m20B25 130mm conrods
m20B25 Pistons (skirts modified for counterbalance clearance)
m20B25 head (ported & flowmatched)
Schrick 272/272/110 Camshaft
Febi bilstein rocker arms
Adjustable camshaft sprocket (modified from original part)
m20B25 intake manifold
m20B25 Throttle body and air filter
m52B28 injectors
New bearings, piston rings, oil pump, gaskets, bolts etc.
Martelius headers
Martelius full exhaust
Megasquirt engine management (using original harness)
Displacement 2.7 liters
CR ~10.5:1
BODY
New front fenders and front panel
Numerous rust repairs
Heavily rolled fenders
Full Mtech2 bodykit flush mounted (FRP knock off since the OEM does not fit a 1987)
Sepang Bronze paintwork
E46 side indicators
CHASSIS, STEERING AND BRAKES
E36 M3 3.2 Front hubs
E36 M3 3.2 Front lower control arms
E36 M3 3.2 Front brake calibers and discs (Calibers are getting powder coated as we speak)
D2 coilovers with E30 topsides in front and full E30 setup in the rear
Powerflex bushings all around
E30 M3 rear hubs
E30 M3 rear brake carriers
E30 M3 rear brake calibers and discs
Z3 1.9 steering rack
E36 M3 3.2 tie rods
Short shift kit (modified from original shifter) with new pins and sleeves/bearings
Getrac 260 gearbox
Type 188 3.64 LSD differential
WHEELS
OZ Futura 9,5x17 + 10,5x17"
INTERIOR
Original sport seats re-upholstered in Alcantara (replica) with white stitchings
325i speedo with chrome gauge rings
I also have a Eaton supercharger sitting on the shelf waiting for install...
#157
Love your work!! The only thing missing from your stable is an F40. Then it would be the complete dream garage I've been thinking of for the last 10 years. Btw, I'm currently looking at a Daytona Violet E36 would love to chat sometime about Bimmers and P-Cars!
Oh, and your wheels... O_o. So good.
Oh, and your wheels... O_o. So good.
#159
Rennlist Member
Thread Starter
Me thinks they're just perfect!! =)
But I think we have to wait until I have some rubber on the wheels and the car is sitting on it's feet.
The plan was to have everything ready by end of the month but I don't believe in it anymore. On the other hand I don't want to rush it. It's better to do it once and do it good!
F40.... I wish...
Thanks man! You did a great job with putting together my wheels!!
Took my Canon with me today:
And test fitted the fronts:
But I think we have to wait until I have some rubber on the wheels and the car is sitting on it's feet.
Love your work!! The only thing missing from your stable is an F40. Then it would be the complete dream garage I've been thinking of for the last 10 years. Btw, I'm currently looking at a Daytona Violet E36 would love to chat sometime about Bimmers and P-Cars!
Oh, and your wheels... O_o. So good.
Oh, and your wheels... O_o. So good.
Thanks man! You did a great job with putting together my wheels!!
Took my Canon with me today:
And test fitted the fronts:
#163
I love it!
You may consider cutting and tapering the front impact mounts on the chassis; ditch the impact bar all togeather.
(edit: I went on a hunt for a photo to show you and see you discussed that on tt forum.)
What a beauty!!!
You may consider cutting and tapering the front impact mounts on the chassis; ditch the impact bar all togeather.
(edit: I went on a hunt for a photo to show you and see you discussed that on tt forum.)
What a beauty!!!
Last edited by CalvinC4S; 05-22-2013 at 07:47 PM.