When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
SO my PIWIS III 39.9 arrived. DON'T BOTHER. You can change hardly anything.
The older versions are better. It also ships with 38.5, which allows for more functional coding.
Yes. GT3 has normal, sport, track.
I think I can make it work on the C4S. I found a couple of entrances for race mode (PCM entrance), but nothing happened, likely needing more modules.
When all was lost...
See the pics. Change the default menu to reduced. It activated the race and track options with the steering ****, not on the main display. The main display follows this: (steering wheel **** - main display)
Normal-Normal
Sport-sport
Track-Sport Plus
Race- Individual.
Wet mode only on the display.
Will drive and see what happens. I suspect it's all a GT3 gimmick.
Last edited by John Mclane; Apr 23, 2021 at 03:04 PM.
When all was lost...
See the pics. Change the default menu to reduced. It activated the race and track options with the steering ****, not on the main display. The main display follows this: (steering wheel **** - main display)
Normal-Normal
Sport-sport
Track-Sport Plus
Race- Individual.
Wet mode only on the display.
Will drive and see what happens. I suspect it's all a GT3 gimmick.
So close John! Id buy that tool in a heartbeat if it allowed us to add the track screen.
So close John! Id buy that tool in a heartbeat if it allowed us to add the track screen.
It's possible that it can be added to the pcm screen, but it's a rename only, functions are the same.
Sport response just shifts to "race - sport plus" for 25s (I changed from 20).
On the GT3 you can combine TC and ESC with the drive modes. More digging required...
Havent read the whole thread, but is there a way to code out the passenger seat belt warning? In the 992 its way to sensitive. I had a 4 pack of tall boys sitting on the seat and it triggered the sensor.
Havent read the whole thread, but is there a way to code out the passenger seat belt warning? In the 992 its way to sensitive. I had a 4 pack of tall boys sitting on the seat and it triggered the sensor.
Yes, although it may not be advisable in the United States of Liability.
I turned off the airbag on/off warning in the 992, as it won't disappear unless you click on the arrow at the steering wheel.
Depending on the version, PIWIS coding capabilities are extensive.
Anyone tried it with Launch x431? I can't get anything modded that I can on the Macan. Woudl like to enable in Front End Electronics activate rear lights with DRL, passing blinker from 3 to 5 and seat belt. Thanx for any help
Porsche 911 GT3 Artisan Edition Pays Homage to Japanese Culture
Slideshow: Porsche has created a Japan-only 911 GT3 Artisan Edition that blends track-ready hardware with design cues inspired by traditional Japanese craftsmanship.
Porsche Reveals Coupe Variant of the Electric Cayenne With a Fresh Look
Slideshow: Porsche's latest electric Cayenne Coupe blends dramatic styling with supercar acceleration, turning the brand's midsize SUV into a 1,139-horsepower flagship.