When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking at a set of Rotiform FUCs (love the heritage style) - their recommended specs are: 20x9 +45
21x12 +65
(5x130 71.6cb)
I know HRE recommends 11.5 +58, is the above Rotiform sizing pretty much flush in rear?
HRE's recommended fitments tend to error on the side of caution. Their recommended fitments are meant to be a "one size fits all" so-to-speak. It's supposed to be able to fit on all 992's no matter the tire/suspension setup that they owner wants to run. The 992 can achieve much wider specs in both wheel and tire width and HRE will build the wheels more aggressively if you tell them. Just an example, you can use our guaranteed fitments that we've tested & fitted on our own 992's which will be more aggressive. Same fitment can be done on the Rotiform's as well. We sell both brands to feel free to send me a private message directly so I can help you pick the perfect wheel & fitment for you.
HRE's recommended fitments tend to error on the side of caution. Their recommended fitments are meant to be a "one size fits all" so-to-speak. It's supposed to be able to fit on all 992's no matter the tire/suspension setup that they owner wants to run. The 992 can achieve much wider specs in both wheel and tire width and HRE will build the wheels more aggressively if you tell them. Just an example, you can use our guaranteed fitments that we've tested & fitted on our own 992's which will be more aggressive. Same fitment can be done on the Rotiform's as well. We sell both brands to feel free to send me a private message directly so I can help you pick the perfect wheel & fitment for you.
Thank you! I don’t know my wheel math enough to know if the difference in the Rotiform recommended rear spec would sit at the same place, or further in/out than the HRE recommended spec? I pretty much want just classic flush look without going over.
I like the style but I am not into black wheels. Just not my thing.
I figured so that's why in my last post I wrote to you that they'd look good in silver (photo below)
And just a note, for those that don't like assembly bolts to be showing on their multi-piece wheels, the HRE S101SC's can have them completely hidden for no extra cost.
Opinions which style (color tbd)?...or keep OEM exclusive design wheels?
I'd keep OEM over those options, but the pics probably aren't true to life. The rendered wheels look way too big - I'm assuming you aren't going +2 on wheel size?
04-03-2022, 02:34 PM
