911ST
#6781
#6783
RL Community Team
Rennlist Member
Rennlist Member
What a travesty.
This could be the first Porsche S/T with a rear seat conversion. Happy to report first hand that Porsche really made great strides to lighten many usual parts found on a 992 GT3 or GT3RS to be considerably lightened. Parts may look similar to the untrained eye but are bespoke to the S/T. Phenomenal piece of kit!
Last edited by ipse dixit; 07-10-2024 at 11:21 AM.
#6784
Drifting
This could be the first Porsche S/T with a rear seat conversion. Happy to report first hand that Porsche really made great strides to lighten many usual parts found on a 992 GT3 or GT3RS to be considerably lightened. Parts may look similar to the untrained eye but are bespoke to the S/T. Phenomenal piece of kit!
#6785
This could be the first Porsche S/T with a rear seat conversion. Happy to report first hand that Porsche really made great strides to lighten many usual parts found on a 992 GT3 or GT3RS to be considerably lightened. Parts may look similar to the untrained eye but are bespoke to the S/T. Phenomenal piece of kit!
The following users liked this post:
GT3Belts (07-12-2024)
#6786
#6787
#6788
Three Wheelin'
I have a feeling that it can be done w/o a light but admittedly this is total speculation on my part. My logic is that the 992 version buckets have been fitted into 991s with no problem. And there is a 991 version of the GT2 folding bucket that works no problem. That said, it does not look period correct at all (and I say that as someone who has GT2 buckets in his 981).
#6789
Pretty straightforward to add the folding buckets - just need to add the 992 PODs detection pad and sensor module, appropriate wiring, and change out the seat belt receivers. Not sure about the seat position sensor on the 997 folding buckets - you might have to change that as well, but totally doable . . .
#6790
Rennlist Member
Ice Grey, Silver wheels & Cognac interior. Beauty!
The following 13 users liked this post by Scottykenneth:
-eztrader- (07-11-2024),
911Vintage (07-11-2024),
alaris (07-17-2024),
cadster (07-10-2024),
dreamin11 (07-17-2024),
and 8 others liked this post.
#6791
Rennlist Member
Join Date: Nov 2002
Location: Between rock and hard place
Posts: 3,765
Received 1,164 Likes
on
639 Posts
Pretty straightforward to add the folding buckets - just need to add the 992 PODs detection pad and sensor module, appropriate wiring, and change out the seat belt receivers. Not sure about the seat position sensor on the 997 folding buckets - you might have to change that as well, but totally doable . . .
Last edited by cosmos; 07-10-2024 at 04:46 PM.
#6793
Mine is being built when the factory is shut down LOL
08/19 - 08/28
08/19 - 08/28
The following 2 users liked this post by PTS:
cosmos (07-10-2024),
Daft Chief (07-11-2024)
#6794