911ST
#6631
#6632
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It does exactly as I have said before with bright colors being needed on this car to emphasize the fender crease.
#6633
Rennlist Member
#6635
Rennlist Member
#6637
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I had a chance to see an S/T up close yesterday at a dealer. Fit an finish on the body panels was sub par, especially the body gaps around the front market lights on the fender. It looked like the car was rushed at the factory.
#6638
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It's ok. That means there will only be 1963 and they all can compare their bespoke finishes.... that matches all the "bespoke" parts for the ST. When its a parts bin car you get parts bin results.
The following users liked this post:
Ukkid74 (06-30-2024)
#6639
Rennlist Member
The following 2 users liked this post by dave2020:
96redLT4 (07-06-2024),
TOporschefan (06-29-2024)
#6640
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
share photos please. Curious. Mine was gorgeous. Btw, nothing is rushed, all cars take the same amount of time on the line as it’s highly automated and on a set schedule.
The following 3 users liked this post by disden:
#6641
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It is still amazing that those who can’t have something will find some way to slam a car, watch, house, wife, etc. Arn’t you glad you don’t have to have that POS. I am sure Porsche picked out one of their limited cars just to make it as crappy as possible. I think the ST’s must be as bad as the R’s.
The following 2 users liked this post by white6speed:
InfamousS/T (06-29-2024),
TOporschefan (06-29-2024)
#6642
Rennlist Member
Join Date: Nov 2002
Location: Between rock and hard place
Posts: 3,696
Received 1,114 Likes
on
615 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, no cars are rushed. All are built at the same speed, same time and the same way. In fact after they are built they have no less than 4 people checking each car to ensure body gaps are within tolerance. It’s actually a neat process, literally white gloves and all.
#6643
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Same story I don’t like what you have. Also interesting to note the negative comments that come from non-members of RL in many cases, that $40 or $50 for membership is a push.
Last edited by white6speed; 06-29-2024 at 07:56 AM.
The following users liked this post:
Ukkid74 (06-30-2024)
#6644
Rennlist Member
#6645
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anything hand built is bound to have flaws. Yet not as many as automated assembly plants such and the big 3. Talk about bad panel alignments, just visit a Ford dealership. They're the absolute worst.