When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For those of you who like to watch the sausage get made.... And before anyone screams "But it says Turbo!" Yes - I dog-food my own designs... this is going in my personal car (2018 Turbo 911)
The 3d model as seen in SolidWorks One of the first prototypes off the printer. This is printed at 34μm, and the only reason you can see lines is because this isn't post processed and it's wet in this pic.
AlexZTuned (07-12-2022),bds (07-12-2022),jbendaou (07-12-2022),myrr (07-12-2022),SeymourButts (07-14-2022),T3X4S (07-24-2022) and 1 others liked this post. (Show less...)
Very nice. How and where do you route the cable for the MagSafe adaptor? I assume you are also using a USBC to USB adaptor
The wire is routed underneath in a channel (directly under where you see the "Turbo" script). If then drops down through a hole which is essentially the ashtray space. From there, it plugs into a low-profile USB-C charger plugged into the cigarette lighter.
This is without any finishing - Just doing a test fit here:
bds (07-28-2022),GoArmy (07-15-2022),myrr (07-15-2022),polobai (07-15-2022),uphoto (07-16-2022),usccharles (01-30-2023) and 1 others liked this post. (Show less...)
07-11-2022, 03:02 PM
991 Wireless iPhone Charger Mount - Snaps over the ashtray
