991 Wireless iPhone Charger Mount - Snaps over the ashtray
#1
Rennlist Member
Thread Starter
991 Wireless iPhone Charger Mount - Snaps over the ashtray
For those that have asked me or are interested, this is the STL file for the iPhone Wireless charger I designed.
You can see a lot more about it here: https://rennlist.com/forums/991/1271...for-991-a.html
The actual STL can be accessed here: https://www.thingiverse.com/thing:5429902
I have a newer design and so I am releasing this design to the public.
Orders will still be fulfilled as they are received since most people don't have a way to print this themselves.
You can see a lot more about it here: https://rennlist.com/forums/991/1271...for-991-a.html
The actual STL can be accessed here: https://www.thingiverse.com/thing:5429902
I have a newer design and so I am releasing this design to the public.
Orders will still be fulfilled as they are received since most people don't have a way to print this themselves.
The following 3 users liked this post by brockbr:
#2
TY!
Curious about the newer design... is this what you are selling at https://b2prototech.com/product/991-magsafe/ or is this something new that is forthcoming?
Curious about the newer design... is this what you are selling at https://b2prototech.com/product/991-magsafe/ or is this something new that is forthcoming?
#4
Nice! I will stay tuned for that, I think! Thanks for your work on this. Good stuff.
Trending Topics
#10
Rennlist Member
Thread Starter
For those of you who like to watch the sausage get made.... And before anyone screams "But it says Turbo!" Yes - I dog-food my own designs... this is going in my personal car (2018 Turbo 911)
The 3d model as seen in SolidWorks
One of the first prototypes off the printer. This is printed at 34μm, and the only reason you can see lines is because this isn't post processed and it's wet in this pic.
The 3d model as seen in SolidWorks
One of the first prototypes off the printer. This is printed at 34μm, and the only reason you can see lines is because this isn't post processed and it's wet in this pic.
The following 6 users liked this post by brockbr:
AlexZTuned (07-12-2022),
bds (07-12-2022),
jbendaou (07-12-2022),
myrr (07-12-2022),
SeymourButts (07-14-2022),
and 1 others liked this post.
#12
Rennlist Member
Thread Starter
This is without any finishing - Just doing a test fit here:
#13
Take my money please