>>The Official Porsche 991.2/911T Club<<Purist Driver's Car>>
#1051
Burning Brakes
Thread Starter
#1052
Three Wheelin'
Nice. I went on a 250 mile ride yesterday with my R8 buddy. Love the car.
#1053
Three Wheelin'
Finally picked up mine yesterday. Have some temporary TracWrap on it until it can get the front clip wrapped. Looking forward to some long drives.
#1054
Burning Brakes
Thread Starter
#1055
Racer
So I spent a lot of time with a detailed post and it was lost. Long story short:
1. Gorilla Glass needs a Blister Free Film base layer because of the dynamic thermal properties (expanding and contracting).
2. I used Xpel Prime XR Black (ceramic performs better with heat rejection and does not interfere with cell, bluetooth, and radar detectors + I think it looks better than metallic).
3. Do not scrub the glass but clean lightly with a towel for prep.
4. Use low or light slip solution on the base layer.
5. Because of the particular product appearance and the Texas heat I went with 35% sides and 20% rear glass.
6. Outcome: I love it. Perfect amount of privacy but not tastelessly "murdered out". With the light coming through the windshield, the rear matches perfectly. No raised dot matrix on the Gorilla Glass makes the tint look real real good. Like factory looking good. With this particular product, I can easily see outside without any issues (night or day).
7. See the pictures and let me know what you think.
I got this done at Xpel headquarters in San Antonio with Andrew (210-584-2325)
1. Gorilla Glass needs a Blister Free Film base layer because of the dynamic thermal properties (expanding and contracting).
2. I used Xpel Prime XR Black (ceramic performs better with heat rejection and does not interfere with cell, bluetooth, and radar detectors + I think it looks better than metallic).
3. Do not scrub the glass but clean lightly with a towel for prep.
4. Use low or light slip solution on the base layer.
5. Because of the particular product appearance and the Texas heat I went with 35% sides and 20% rear glass.
6. Outcome: I love it. Perfect amount of privacy but not tastelessly "murdered out". With the light coming through the windshield, the rear matches perfectly. No raised dot matrix on the Gorilla Glass makes the tint look real real good. Like factory looking good. With this particular product, I can easily see outside without any issues (night or day).
7. See the pictures and let me know what you think.
I got this done at Xpel headquarters in San Antonio with Andrew (210-584-2325)
I am about to tint my new Carrera T and this will save me a lot of time and research.
#1056
Rennlist Member
All. An update. So the base layer wasn't performing the way I wanted. There was a significant amount of distortion from it that bothered me to the extent of getting it removed. The good thing about a base layer on polycarbonate is that it uses vinyl adhesive which is non-damaging to the Gorilla glass and comes right off. I will be doing some research about other base layers. Madico was what my guy used. It could have been that the layer was damaged or that it wasn't installed well. However, I looked at the roll myself and saw a significant amount of distortion from it. I will be researching other base layers. Sad. I liked the tint.
#1057
Racer
All. An update. So the base layer wasn't performing the way I wanted. There was a significant amount of distortion from it that bothered me to the extent of getting it removed. The good thing about a base layer on polycarbonate is that it uses vinyl adhesive which is non-damaging to the Gorilla glass and comes right off. I will be doing some research about other base layers. Madico was what my guy used. It could have been that the layer was damaged or that it wasn't installed well. However, I looked at the roll myself and saw a significant amount of distortion from it. I will be researching other base layers. Sad. I liked the tint.
#1058
All. An update. So the base layer wasn't performing the way I wanted. There was a significant amount of distortion from it that bothered me to the extent of getting it removed. The good thing about a base layer on polycarbonate is that it uses vinyl adhesive which is non-damaging to the Gorilla glass and comes right off. I will be doing some research about other base layers. Madico was what my guy used. It could have been that the layer was damaged or that it wasn't installed well. However, I looked at the roll myself and saw a significant amount of distortion from it. I will be researching other base layers. Sad. I liked the tint.
My preferred place has 3M crystalline as well as Xpel...
#1060
Rennlist Member
#1061
Burning Brakes
Thread Starter
- Helmet (Bell Sport EV) $429 - Already purchased
- HANS device III = $442
- Right Schroth Harness = $479
- Left Schroth Harness = $479
- RollBar / Harness Cage (e.g. GMG 991 LMS) = $2,600 + install
I realize this is a drop in the bucket to track day costs... but I am not sure how much, if all, I will track this car... And a 'all or nothing' of $4k for Hans + harness + cage seems a questionable investment. (But cheap compared to my life.) Not to mention wife freak out (who already wonders why we need a fire extinguisher in the car - if there is a permanently attached cage in the car).
1st world problems.
#1062
Three Wheelin'
Great, DE events are fun. Did a lot in my 6, will do a few in the T.
If you don’t have PCCB, GiroDisc now sells a nice 350mm upgrade brake rotor kit, fits the caliper very well. Get the tarett caliper stud kit and spiegler 6 line kit to make pad changes easier. I recently installed this on my car, looks great and brake feel is good.
thanks, target corrected to tarett
If you don’t have PCCB, GiroDisc now sells a nice 350mm upgrade brake rotor kit, fits the caliper very well. Get the tarett caliper stud kit and spiegler 6 line kit to make pad changes easier. I recently installed this on my car, looks great and brake feel is good.
thanks, target corrected to tarett
Last edited by tgavem; 12-01-2018 at 08:29 PM.
#1064
Advanced
911T Tribute - My 2019 Carrera T
Hi Carrera T fans.
Just thought I would share some photos of mine.
I ordered mine in early 2018, and took delivery in Leipzig, Germany. I am really glad I got to experience European delivery, and enjoyed the two weeks traveling with my wife/then son as they split their time with me.
Wife my wife we travelled: Leipzig, Dresden, Aschau, Berchtesgarten, Konigssee, Fussen, Fie' (Italy - Dolomites), Heidelberg, Frankfurt (passenger exchange)
With my son we travelled: Frankfurt, Spa (attended Formula 1 race), Nurburgring (RingTaxi.com hot laps in GT3 RS - wow), Luxembourg, Black Forest, Stuttgart (Museum, Christophorus Steak House, Car drop-off), Frankfurt (fly home)
My car arrived in Seattle about 2 months later, and I took re-delivery on Nov 3.
During the waiting time for my delivery at home, I was able to attend Rennsport VI, where I was able to see so many classic 911T models and also meet the famous Vic Elford who won the Monte Carlo Rally in 1968 with a 911T. This event was so amazing, I cannot wait to go to the next one, whenever that will be...
So, my car...
My order code was: http://www.porsche-code.com/PJSNBAI0
2019 Guards Red - Manual, Carbon Bucket Seats, Front Axel Lift, All wheel steering, Bose stereo, Black Satin wheels, Badge delete, leather on dash with red deviated stitching, white chrono faceplate, sport facia and tail (mini duck tail), black sport exhaust and headlights.
The transformation...
I am a sucker for the nostalgia of former 911s, and I wanted this late model version to bring back some of the favorite things I have always loved about them. So I have applied the following changes:
Removed the Carrera T agate gray side decals, and replaced with satin black Porche Triple Stripe graphics
Removed the PORSCHE emblem on the back of the car and replace with wide banner style name graphic similar to many cars from the 60/70s
Wrapped mirrors to change color to black satin
Ordered and replaced rear engine grille cover with a flat black "GTS" version. (suncoastparts). The original now hangs in my garage with the nice metal badges attached to display my participation in euro deliver/rennsport, etc.
Installed 5mm wheel spacers all around (ECS kit for Carrera T)
Ordered and installed classic 911T model badge on rear of car below grille. (Crowd favorite at my recent Porsche club driving tour event).
Replace amber side markers with European style clear markers
Installed ZunSport front radiator inlet grill screens (black)
On order, Pepita Houndstooth bucket seat cushion covers to complete the time warp (Classicfx.net)
Just thought I would share some photos of mine.
I ordered mine in early 2018, and took delivery in Leipzig, Germany. I am really glad I got to experience European delivery, and enjoyed the two weeks traveling with my wife/then son as they split their time with me.
Wife my wife we travelled: Leipzig, Dresden, Aschau, Berchtesgarten, Konigssee, Fussen, Fie' (Italy - Dolomites), Heidelberg, Frankfurt (passenger exchange)
With my son we travelled: Frankfurt, Spa (attended Formula 1 race), Nurburgring (RingTaxi.com hot laps in GT3 RS - wow), Luxembourg, Black Forest, Stuttgart (Museum, Christophorus Steak House, Car drop-off), Frankfurt (fly home)
My car arrived in Seattle about 2 months later, and I took re-delivery on Nov 3.
During the waiting time for my delivery at home, I was able to attend Rennsport VI, where I was able to see so many classic 911T models and also meet the famous Vic Elford who won the Monte Carlo Rally in 1968 with a 911T. This event was so amazing, I cannot wait to go to the next one, whenever that will be...
So, my car...
My order code was: http://www.porsche-code.com/PJSNBAI0
2019 Guards Red - Manual, Carbon Bucket Seats, Front Axel Lift, All wheel steering, Bose stereo, Black Satin wheels, Badge delete, leather on dash with red deviated stitching, white chrono faceplate, sport facia and tail (mini duck tail), black sport exhaust and headlights.
The transformation...
I am a sucker for the nostalgia of former 911s, and I wanted this late model version to bring back some of the favorite things I have always loved about them. So I have applied the following changes:
Removed the Carrera T agate gray side decals, and replaced with satin black Porche Triple Stripe graphics
Removed the PORSCHE emblem on the back of the car and replace with wide banner style name graphic similar to many cars from the 60/70s
Wrapped mirrors to change color to black satin
Ordered and replaced rear engine grille cover with a flat black "GTS" version. (suncoastparts). The original now hangs in my garage with the nice metal badges attached to display my participation in euro deliver/rennsport, etc.
Installed 5mm wheel spacers all around (ECS kit for Carrera T)
Ordered and installed classic 911T model badge on rear of car below grille. (Crowd favorite at my recent Porsche club driving tour event).
Replace amber side markers with European style clear markers
Installed ZunSport front radiator inlet grill screens (black)
On order, Pepita Houndstooth bucket seat cushion covers to complete the time warp (Classicfx.net)
Last edited by glenncurtis; 12-10-2018 at 11:24 PM.
#1065
Three Wheelin'
Very nice glenncurtis. Love the Decals.