picture of your garage
#4204
The following 4 users liked this post by Maverick787:
#4205
Rennlist Member
Nothing like most of the garages here, but I'm happy. New floor coating this week. I think they like it!
The following 5 users liked this post by Dave's911:
AllAboutThatP (07-18-2020),
b0rderman (07-22-2020),
cadster (07-21-2020),
fijibubba (07-18-2020),
rocris120 (07-30-2024)
The following users liked this post:
Dave's911 (07-19-2020)
#4208
Advanced
Kama,
What is your garage ceiling height, and what is the subsequent "walk under" clear height for the lift when you have it up with the GT3 on it? Is the lift height max'd out in that picture?
Thanks!
What is your garage ceiling height, and what is the subsequent "walk under" clear height for the lift when you have it up with the GT3 on it? Is the lift height max'd out in that picture?
Thanks!
#4209
Ceiling is 12'. Walk under in that pic is slightly over 6'. Lift not maxed out in pic so probably another ~2' to go.
The following users liked this post:
b0rderman (07-23-2020)
#4210
Drifting
#4211
No movement once the car is on and lift raised but if you hang on the runway with your body weight it does give some. I've only had the lift 2 years and all bolts are tight. I'm thinking about an oil change, however, as a precautionary measure. It's probably gets used 10 times a month maximum so it may be overkill for that...
#4212
Who wants a Porsche dealership sign for the garage?
https://www.motor1.com/news/435839/p...sign-for-sale/
https://www.motor1.com/news/435839/p...sign-for-sale/
#4213
Rennlist Member
Lights and mini-split are in. Needs a few more coats of paint, some doors, flooring, lift, and cabinets.
The following 4 users liked this post by bonehead:
#4214
I finally got my Amish built butcher block tops put on my work benches. Here’s a few recent pictures
A sign I built:
After hanging it on the wall
Getting ready to make a McLaren one:
A sign I built:
After hanging it on the wall
Getting ready to make a McLaren one:
The following 8 users liked this post by AllAboutThatP:
007DT (08-06-2020),
bonehead (08-06-2020),
Brent A. (08-06-2020),
cadster (08-06-2020),
CustomPerformanc (08-06-2020),
and 3 others liked this post.