picture of your garage
#3841
Rennlist Member
#3842
Rennlist Member
[QUOTE=dbbarron;16051888]Just installed some LED strip lights on my lift rails.
[/
QUOTE]
Very nice. On my list of garage projects. But there is a lot of stuff on that list. Lighting both up and down.
[/
QUOTE]
Very nice. On my list of garage projects. But there is a lot of stuff on that list. Lighting both up and down.
#3843
Please share how you installed the lights and what you used.
Thanks so much
Thanks so much
#3844
Rennlist Member
Some progress
Worked this design out about 10 years ago and decided to change the materials and just do it.
Fabricated the stainless steel supports about a week ago, installed them yesterday.
Today had a chance to have a few of my guys bring the cabinets I have been working on and drop them onto the supports. Fit like a glove.
Fabricated the stainless steel supports about a week ago, installed them yesterday.
Today had a chance to have a few of my guys bring the cabinets I have been working on and drop them onto the supports. Fit like a glove.
#3845
https://www.ebay.com/itm/Advantage-L...pEwEQZZogK3-Wg
https://www.inspiredled.com/product/...ift-light-kit/
#3846
I used the following LED strip and power supply
I just stuck the self adhesive strip to the inside of the rails.
One day later the adhesive was failing so I used the little stick on squares that hold zip ties.
I just stuck the self adhesive strip to the inside of the rails.
One day later the adhesive was failing so I used the little stick on squares that hold zip ties.
#3849
Banned
Well nothing like some here but here is the modest three car with some before and then with my new Saber cabinets installed. Flooring next and then some new lighting.
#3851
Banned
#3852
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
^ once the tiles go in, it will look spiffy
how did you flush mount the big *** lights?
I asked pic of actual completed projects but the new lights were too new and they didnt have any. the cut sheets were not too helpful. trying to decided to flush mount like yours or change on wires.
how did you flush mount the big *** lights?
I asked pic of actual completed projects but the new lights were too new and they didnt have any. the cut sheets were not too helpful. trying to decided to flush mount like yours or change on wires.
#3853
Just added some new doors, and my buddy stopped by with some eye candy.
#3854
Banned
Not mounted yet but yes they will be flush mounted. Have to have a junction box to flush mount or else you can still flush mount but you would have a plug coming out the side and into an outlet.
#3855
Rennlist Member
Join Date: Jan 2016
Location: New Orleans, LA (NOLA)
Posts: 5,254
Received 2,269 Likes
on
1,043 Posts