When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Worked this design out about 10 years ago and decided to change the materials and just do it.
Fabricated the stainless steel supports about a week ago, installed them yesterday.
Today had a chance to have a few of my guys bring the cabinets I have been working on and drop them onto the supports. Fit like a glove.
I just stuck the self adhesive strip to the inside of the rails.
One day later the adhesive was failing so I used the little stick on squares that hold zip ties.
Well nothing like some here but here is the modest three car with some before and then with my new Saber cabinets installed. Flooring next and then some new lighting.
GT3 player par excellence Lifetime Rennlist Member
Joined: Apr 2002
Posts: 43,573
Likes: 5,897
From: san francisco
^ once the tiles go in, it will look spiffy
how did you flush mount the big *** lights?
I asked pic of actual completed projects but the new lights were too new and they didnt have any. the cut sheets were not too helpful. trying to decided to flush mount like yours or change on wires.
Not mounted yet but yes they will be flush mounted. Have to have a junction box to flush mount or else you can still flush mount but you would have a plug coming out the side and into an outlet.
08-21-2019 | 09:17 PM
