My 964 C2 Transformation Build Thread
#1156
Rennlist Member
Thread Starter
300 miles in the red car today. Rain tomorrow supposedly
means the mountain roads likely to get snow. So it the inland hills today
tomorrow rain no drive
tuesday will rip in the red car up to Los olivos. Wife said she needs wine.
weds malibu
thurs ach if it’s clear
friday ???
fk covid. At least i can do a drivecation
means the mountain roads likely to get snow. So it the inland hills today
tomorrow rain no drive
tuesday will rip in the red car up to Los olivos. Wife said she needs wine.
weds malibu
thurs ach if it’s clear
friday ???
fk covid. At least i can do a drivecation
The following 3 users liked this post by Spyerx:
#1157
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
^ too many stickers on quarter window, dead weight.
#1158
Rennlist Member
Thread Starter
#1159
Rennlist Member
Thread Starter
Installed the Cup car ABS defeat switch today. Easy install just making it neat and tidy and running wires cleanly takes time.... i like to sheath all wires i install, heat shrink (sometimes solder, usually use crimp connectors), zip ties, etc. finding a suitable ground... used the ground from the removed fog light switch light bulb. That worked To allow abs switch light to function. Metal coat hanger to fish wire through grommet next to the odb1 connector that worked well as it had room for a pair of smaller gauge wires in a sheath.
I’ll post some pics. It does work!
did steps in this thread:
https://rennlist.com/forums/964-foru...sable-abs.html
I’ll post some pics. It does work!
did steps in this thread:
https://rennlist.com/forums/964-foru...sable-abs.html
Last edited by Spyerx; 12-30-2020 at 03:18 AM.
The following 3 users liked this post by Spyerx:
#1160
Rennlist Member
Installed the Cup car ABS defeat switch today. Easy install just making it neat and tidy and running wires cleanly takes time.... i like to sheath all wires i install, heat shrink (sometimes solder, usually use crimp connectors), zip ties, etc. finding a suitable ground... used the ground from the removed fog light switch light bulb. That worked To allow abs switch light to function. Metal coat hanger to fish wire through grommet next to the odb1 connector that worked well as it had room for a pair of smaller gauge wires in a sheath.
I’ll post some pics. It does work!
did steps in this thread:
https://rennlist.com/forums/964-foru...sable-abs.html
I’ll post some pics. It does work!
did steps in this thread:
https://rennlist.com/forums/964-foru...sable-abs.html
Last edited by gregmitch; 12-30-2020 at 04:59 PM.
#1161
Rennlist Member
#1162
Rennlist Member
Thread Starter
the keen eyed will note it’s on the wrong side compared to an rs.
well my car isn’t an rs
and i liked it on the pass side
#1163
Rennlist Member
I'm going to save myself the frustration of changing the shocks and order up one of those hood supports. Now I won't have to hold it up with my head in the cold.
The following users liked this post:
911Jetta (01-04-2021)
#1165
Rennlist Member
Thread Starter
The following 3 users liked this post by Spyerx:
#1167
Rennlist Member
Thread Starter
A bit of a travesty really... we bought a new house in May of 2021. We proceeded to gut it and rebuild the interior. We moved in in May 22.
In sept 21 I parked all my cars. The 71 went to Bbi to complete all the engine swap work, the 964 was washed, waxed, oil changed, fuel stabilized, and parked under cover in my other garage. The RS same, parked at a buddies house.
I've got the 71 home for a couple months, driving it, it's great.
The RS finished up annual service at BBI and back in the garage.
The 964 just dropped for full annual service at BBI.
The car was parked for a year... started right up, no smoke, no weirdness, no noises. Drove fine. I forgot how good it is.
Should be back in a week or 2. This one will be a Luft this year. I think LOL.
Time to get back at it. Done with house ****. Time to get back to car ****.
In sept 21 I parked all my cars. The 71 went to Bbi to complete all the engine swap work, the 964 was washed, waxed, oil changed, fuel stabilized, and parked under cover in my other garage. The RS same, parked at a buddies house.
I've got the 71 home for a couple months, driving it, it's great.
The RS finished up annual service at BBI and back in the garage.
The 964 just dropped for full annual service at BBI.
The car was parked for a year... started right up, no smoke, no weirdness, no noises. Drove fine. I forgot how good it is.
Should be back in a week or 2. This one will be a Luft this year. I think LOL.
Time to get back at it. Done with house ****. Time to get back to car ****.
The following 4 users liked this post by Spyerx:
#1168
Rennlist Member
^^ Nice to have you back. Hope your happy with the new house.
#1169
Rennlist Member
Thread Starter