The silly little question thread ...
#1263
Rennlist Member
No little red **** lower between seats at hinge?
#1264
Pro
No, that's what the manual showed it should have. I couldn't find anything on the top or fronts of the seats with the top down. Kinda hard to get back there with it up.
Without putting the seats down I don't see a way to tuck the top boot behind the seats. The boot interferes with the rear seat belts for anyone taller than my 7 year old nephew. Then again, anyone taller than that probably won't fit back there anyway.
Without putting the seats down I don't see a way to tuck the top boot behind the seats. The boot interferes with the rear seat belts for anyone taller than my 7 year old nephew. Then again, anyone taller than that probably won't fit back there anyway.
#1265
No, that's what the manual showed it should have. I couldn't find anything on the top or fronts of the seats with the top down. Kinda hard to get back there with it up.
Without putting the seats down I don't see a way to tuck the top boot behind the seats. The boot interferes with the rear seat belts for anyone taller than my 7 year old nephew. Then again, anyone taller than that probably won't fit back there anyway.
Without putting the seats down I don't see a way to tuck the top boot behind the seats. The boot interferes with the rear seat belts for anyone taller than my 7 year old nephew. Then again, anyone taller than that probably won't fit back there anyway.
#1266
Rennlist Member
My rocker panel is a little lose and as I was poking around, realized that I was missing some of the clips/parts that hold the trim and panel to the body.
The problem is I can't seem to find the bits on Pelican that I need to get it back on. I did find this chart that shows the parts I need...
Anybody here by any chance know what parts 4, 19, 15 in this chart are called?
This is the loose side:
This is what they are supposed to be:
Btw, that yellow 964 looks stunning!
The problem is I can't seem to find the bits on Pelican that I need to get it back on. I did find this chart that shows the parts I need...
Anybody here by any chance know what parts 4, 19, 15 in this chart are called?
This is the loose side:
This is what they are supposed to be:
Btw, that yellow 964 looks stunning!
#1267
Can I suggest that you search for "E_964_KATALOG" which is the pdf containing all the diagrams and corresponding part numbers. This step transformed my life.
With regard to your missing bits I seem to recall that the "bolt" section is actually part of the shark fin trim panel itself and has a highly annoying habit of breaking off. I found that those on my car had been glued back on poorly and I needed to re-do it all using epoxy. It may be that I'm barking up a wrong tree or that the retainers have just vibrated free over time but check the parts & diagrams carefully and you should have your answer.
Z
Edit: Taking my own advice I looked at the manual. Part 4 is A999 507 373 00, part 15 is 999 049 022 40 and part 19 is 964 559 797 00 (left) or 964 559 798 00 (right). Clearly my memory doesn't work as those part 4s are separate items. Maybe it's how they secure to the shark fin (Part 2) that breaks off?? Someone else here will know for sure.
With regard to your missing bits I seem to recall that the "bolt" section is actually part of the shark fin trim panel itself and has a highly annoying habit of breaking off. I found that those on my car had been glued back on poorly and I needed to re-do it all using epoxy. It may be that I'm barking up a wrong tree or that the retainers have just vibrated free over time but check the parts & diagrams carefully and you should have your answer.
Z
Edit: Taking my own advice I looked at the manual. Part 4 is A999 507 373 00, part 15 is 999 049 022 40 and part 19 is 964 559 797 00 (left) or 964 559 798 00 (right). Clearly my memory doesn't work as those part 4s are separate items. Maybe it's how they secure to the shark fin (Part 2) that breaks off?? Someone else here will know for sure.
#1268
Drifting
My rocker panel is a little lose and as I was poking around, realized that I was missing some of the clips/parts that hold the trim and panel to the body.
The problem is I can't seem to find the bits on Pelican that I need to get it back on. I did find this chart that shows the parts I need...
Anybody here by any chance know what parts 4, 19, 15 in this chart are called?
The problem is I can't seem to find the bits on Pelican that I need to get it back on. I did find this chart that shows the parts I need...
Anybody here by any chance know what parts 4, 19, 15 in this chart are called?
Bookmark that website (http://www.autoatlanta.com/porsche-p..._911_parts.php), very useful to look up part numbers in a pinch.
#1269
Rennlist Member
Amazing, exactly what I was looking for....thanks Z and Laurent. Those links are definitely being bookmarked.
I'm hoping with these parts the trim can be bolted on without any gluing (it seems like the trim end tucks in and is held in by that clamp) but I'll have to give it a try to see what works.
I'm hoping with these parts the trim can be bolted on without any gluing (it seems like the trim end tucks in and is held in by that clamp) but I'll have to give it a try to see what works.
#1270
Burning Brakes
Also, look in the forum for repair of the "shark fin". I've posted on this topic too. Here is one good thread on it:
https://rennlist.com/forums/964-foru...in-repair.html
I would also seriously recommend using an adhesive like this to reattach the "bolt" fasteners (#4) on the fin:
I tried other epoxy, and it did not hold. This product is very good. Your local body shop should have some. It requires a special "gun" to apply, and that's not worth you purchasing for this one application.
https://rennlist.com/forums/964-foru...in-repair.html
I would also seriously recommend using an adhesive like this to reattach the "bolt" fasteners (#4) on the fin:
I tried other epoxy, and it did not hold. This product is very good. Your local body shop should have some. It requires a special "gun" to apply, and that's not worth you purchasing for this one application.
#1272
Technical Guru
Rennlist Member
Rennlist Member
Last edited by JasonAndreas; 08-29-2016 at 07:26 PM.
#1274
Hope you don't mind me bouncing this up the list again. I'm sure one of you has a pic.
My RHD car was missing its luggage compartment light when I got it. I have the small loom section, diffuser & bulb but can't figure out exactly the route that the wire is supposed to follow. Also, the replacement cable includes an unfinished end which I presume is to go to the nearby earthing point. Can anyone confirm with a picture please?
Z
Z