Project "Amazon" Restoration-Lightweight C4- 2Pack paint soon;-)
#242
Three Wheelin'
Thread Starter
Happy New Year to you too! & to every looker
Not been on here much, been busy with getting the festive period out of the way with work and running to and fro getting either new parts or things shotblasted ready for powercoat. Am sure theres a few questions and advice I need asking you guys!
As for colour I have narrowed down to either Mint, Emerald, Viper or Maritime. Gosh i wud love Rubystone!
Just seen a Mode Grau grey Porsche GT!!!! mad
Not been on here much, been busy with getting the festive period out of the way with work and running to and fro getting either new parts or things shotblasted ready for powercoat. Am sure theres a few questions and advice I need asking you guys!
As for colour I have narrowed down to either Mint, Emerald, Viper or Maritime. Gosh i wud love Rubystone!
Just seen a Mode Grau grey Porsche GT!!!! mad
#243
Three Wheelin'
Thread Starter
Stop confusing the matter!!!
Anyway, odd and sod are coming through slowly, parts are getting gathered through time, and as mentioned certain things are getting refurbed.
Through the journey in sourcing parts, very interesting and generous people I have met on the way, such as Francis Boodts who donated a center section of the rear bumper for my car, as it wasn't needed. He sent me 3 pictures one of which the center section it came off and 2 of which he races his GTS Viper he races in Lemans hopefully this season.
Anyway, odd and sod are coming through slowly, parts are getting gathered through time, and as mentioned certain things are getting refurbed.
Through the journey in sourcing parts, very interesting and generous people I have met on the way, such as Francis Boodts who donated a center section of the rear bumper for my car, as it wasn't needed. He sent me 3 pictures one of which the center section it came off and 2 of which he races his GTS Viper he races in Lemans hopefully this season.
#244
Three Wheelin'
Thread Starter
Thanks to the Yorkshire VW lads and a local motorsport company for sourcing 2 set of BBS E28 18" magnesium wheels plus odd dishes and spares.
a set made up
a set made up
Last edited by Nski; 01-05-2011 at 09:42 PM.
#245
Three Wheelin'
Thread Starter
Favour owe big thanks to Daz & R at Porsche Reading GB for getting me the >>>>>>>
RS GLASSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
Then all the rubbers and seals have come through..will lay all out a lot later when the cars getting built
RS GLASSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
Then all the rubbers and seals have come through..will lay all out a lot later when the cars getting built
Last edited by Nski; 01-05-2011 at 10:06 PM.
#246
Three Wheelin'
Thread Starter
Lee
Odds bits got b-blasted and have turned out very well, considering some bits have been painted in the past or flaking with years of builtup grease and dirt! These bits are the 1st to be cleaned..... now deciding what colour they should go
Odds bits got b-blasted and have turned out very well, considering some bits have been painted in the past or flaking with years of builtup grease and dirt! These bits are the 1st to be cleaned..... now deciding what colour they should go
Last edited by Nski; 01-05-2011 at 10:11 PM.
#249
Three Wheelin'
Thread Starter
Thanks guys, hopefully will put some pictures up of JJ (R-Tek Motorsport) working on the harness points.
Once JJ gives the go-ahead with working on the harness points, all the bits such as doorbars, welding points to the rollbars and the body need to be finished will be shown.
In the meantime, you can see what JJs about at R-Tek Motorsport.
http://en-gb.facebook.com/pages/R-Te...10065635723264
http://rtek-motorsport.com/
And his Nurburgring Mk2 G60 toy..
http://uk-mkivs.net/forums/t/322822.aspx
Once JJ gives the go-ahead with working on the harness points, all the bits such as doorbars, welding points to the rollbars and the body need to be finished will be shown.
In the meantime, you can see what JJs about at R-Tek Motorsport.
http://en-gb.facebook.com/pages/R-Te...10065635723264
http://rtek-motorsport.com/
And his Nurburgring Mk2 G60 toy..
http://uk-mkivs.net/forums/t/322822.aspx
#250
Instructor
Join Date: May 2008
Location: East Midlands, UK.
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
This is a great looking project.
When I did my engine rebuild I couldn't decide on colour for the fan and covers so went safe with black. Now wish i'd have gone gold like your wheels to match my engine tins.
A heads up on the fan,I filed a really small amount off each blade as
the paint can be a bit thick on the edge making it very close to the shroud.
Superb job Norm.
Andy.
#251
Three Wheelin'
Thread Starter
Hey Norm,
This is a great looking project.
When I did my engine rebuild I couldn't decide on colour for the fan and covers so went safe with black. Now wish i'd have gone gold like your wheels to match my engine tins.
A heads up on the fan,I filed a really small amount off each blade as
the paint can be a bit thick on the edge making it very close to the shroud.
Superb job Norm.
Andy.
This is a great looking project.
When I did my engine rebuild I couldn't decide on colour for the fan and covers so went safe with black. Now wish i'd have gone gold like your wheels to match my engine tins.
A heads up on the fan,I filed a really small amount off each blade as
the paint can be a bit thick on the edge making it very close to the shroud.
Superb job Norm.
Andy.
Had a conversation with Roger Harradine, who is building a 911 from scratch as well, and has gone fibreglass (not your usual fibreglass, but made of special weave) and is a lot lighter, thinking about it. its heat resistant too! They do tin-wear for Redtek (classic porsche)
Norm
#252
Hi norm, lovely project . Is the rain gutter delete a lot of work? Can it be done by a reputable bodyshop?
Looking forward to seeing your progress. Will you keep the car in it's original colour?
Looking forward to seeing your progress. Will you keep the car in it's original colour?
#253
Three Wheelin'
Thread Starter
He did say it take more time, but can be easily done as its just as much more effort as folding and unfolding the gutter rails.
I believe he is painting an SC shell soon that has the gutter rails deleted replicating the RUF Yellowbird 911.
As for the colour, shes getting a different shade of green;-)
p.s You have a PM
#255
Nordschleife Master
Norm, for your reference here's a pic of my fan when it was powder coated as part of the engine rebuild, the valve covers where powder coated the same colour and all the tins were powder coated black.