Project "Amazon" Restoration-Lightweight C4- 2Pack paint soon;-)
#286
Three Wheelin'
Thread Starter
#287
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The spoiler wall as already mentioned is not bonded. It simply clicks in at the top and the bottom. It took me minutes to change mine. Just to be sure, here's what a replaced wall looks like:
![](http://i32.photobucket.com/albums/d25/brksy16/SDC11381.jpg)
The bottom snaps onto a round bar and easily unsnaps. The top slides onto a flat bar and will probably need 'helping' with a flat screw driver to slide it off. As for reasonably priced, I thought 52 quid was a bit cheeky for a piece of corrugated plastic!
If you mean the grill itself, that's just one piece.
p.s. I like the idea of the exhaust outlet on the roof
![](http://i32.photobucket.com/albums/d25/brksy16/SDC11381.jpg)
The bottom snaps onto a round bar and easily unsnaps. The top slides onto a flat bar and will probably need 'helping' with a flat screw driver to slide it off. As for reasonably priced, I thought 52 quid was a bit cheeky for a piece of corrugated plastic!
If you mean the grill itself, that's just one piece.
p.s. I like the idea of the exhaust outlet on the roof
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#288
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The spoiler wall as already mentioned is not bonded. It simply clicks in at the top and the bottom. It took me minutes to change mine. Just to be sure, here's what a replaced wall looks like:
![](http://i32.photobucket.com/albums/d25/brksy16/SDC11381.jpg)
The bottom snaps onto a round bar and easily unsnaps. The top slides onto a flat bar and will probably need 'helping' with a flat screw driver to slide it off. As for reasonably priced, I thought 52 quid was a bit cheeky for a piece of corrugated plastic!
If you mean the grill itself, that's just one piece.
p.s. I like the idea of the exhaust outlet on the roof![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![](http://i32.photobucket.com/albums/d25/brksy16/SDC11381.jpg)
The bottom snaps onto a round bar and easily unsnaps. The top slides onto a flat bar and will probably need 'helping' with a flat screw driver to slide it off. As for reasonably priced, I thought 52 quid was a bit cheeky for a piece of corrugated plastic!
If you mean the grill itself, that's just one piece.
p.s. I like the idea of the exhaust outlet on the roof
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
NO! not the spoiler wall! yes these are prone to snap, mine did on the white one.
I mean the grill!!!!!! AS ARROWED
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
Steveo, you should have asked, i had a spare brand new wall in the garage.
#289
Nordschleife Master
#292
Drifting
#293
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Remember the grotty worn engine we took out of Amazon?
![](http://i48.photobucket.com/albums/f231/Nski/IMG00296-20101025-1724.jpg)
![](http://i48.photobucket.com/albums/f231/Nski/IMG00302-20101025-1725-1.jpg)
the one we ship to the Doc>>
![](http://i48.photobucket.com/albums/f231/Nski/IMG00303-20101026-1043.jpg)
Engine 90% almost built, and all new tinwear even powercoated!
![](http://i48.photobucket.com/albums/f231/Nski/IMG00296-20101025-1724.jpg)
![](http://i48.photobucket.com/albums/f231/Nski/IMG00302-20101025-1725-1.jpg)
the one we ship to the Doc>>
![](http://i48.photobucket.com/albums/f231/Nski/IMG00303-20101026-1043.jpg)
Engine 90% almost built, and all new tinwear even powercoated!
![](http://i48.photobucket.com/albums/f231/Nski/myenginebuilt.jpg)
Last edited by Nski; 02-11-2011 at 12:57 PM.
#295
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I must thank the Strasse boys Charlie, big Dave, the legendary older Dave and especially Chris Dyer (who claimed the 2010 Porsche Club Championship Crown) for their free advise and help running through the hard bits.
Already, they have done a bareshell RS replica from shell up and running nice.
Already, they have done a bareshell RS replica from shell up and running nice.
![](http://i48.photobucket.com/albums/f231/Nski/IMG00520-20110210-1403.jpg)
#296
Racer
Join Date: Apr 2006
Location: the land of taxes (uk)
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
black looks good to me old pal,
I was hopeing for a ride out in that amazon soon dude, your not sitting at home watching too much PORSCHE CUP racing instead of getting the car done!!!!!!!!
are yeah?
I was hopeing for a ride out in that amazon soon dude, your not sitting at home watching too much PORSCHE CUP racing instead of getting the car done!!!!!!!!
are yeah?
#297
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
The 964 PORSCHE CUP races ive been watching
![burnout](https://rennlist.com/forums/graemlins/burnout.gif)
![Confused](https://rennlist.com/forums/images/smilies/confused.gif)
All the legs, suspension has all been taken off, stripped and ready to go get blasted.