s65e90

I'd prob take a set too.

konrad911

So we have 3 sets already. I’ll take one more for myself, that’s 4.

I'll cross post on 993 and 993T forums that we’re planning next batch, maybe guys there will also get interested.

Stay tuned

PS. Shipment pricing update to the US:
1. Bolts OR Studs $20 (no change)
2. Bolts AND Studs $30 (learned the hard way that those extra 300 grams cost the extra $10 due to the different type of package above 2000 grams).

konrad911

Guys, talked to CNC shop and they have few sheets of billet left from the last batch.
They told me they can make 4 sets out of it keeping the price from the first batch ($399 + optional extra hardware + shipping).

Should be ready from CNC within a week or so, then anodising - add another week.

So anyone late, this is the time. Myself I can wait for the next batch, so the slot #4 is free.
Anything above 4 sets and we're talking already mid June for CNC alone and price uplift for sure.

Please update the list with the finish and hardware you want, and I'll PM you with PayPal details.

1. GoKart / Silver or Black? / Bolts or Studs or Both?
2. Duncan Ellis / Black / Bolts or Studs or Both?
3. s65e90 / Black / Bolts AND Studs
4. ???

s65e90

black and bolts and studs for me. I do like that red anodizing though too!

konrad911

I'll check turnaround time for the Red

s65e90

I'm not sure I could go pull off the bright red. I'll prob take the black

konrad911

Haha Black and Silver are the most stock’ish ones obviously.

I like though the Copper Orange, which I used for some of my other parts…

Ecosse911

If the 4th slot is still up for grabs I will take it

1. GoKart / Silver or Black? / Bolts or Studs or Both?
2. Duncan Ellis / Black / Bolts or Studs or Both?
3. s65e90 / Black / Bolts AND Studs
4. @Ecosse911 / Black / studs

konrad911

That would close this list. I’ll send you guys PMs with details what when where etc.

Thanks

konrad911

Quick update. CNC is done, I'm waiting for the package.
When I receive it, these go to anodising.
Guys in green we're all good.
@GoKart and @s65e90 you have PMs, please confirm back.

1.GoKart / Silver or Black? / Bolts or Studs or Both?
2. Duncan Ellis / Black / Bolts and Studs
3. s65e90 / Black / Bolts AND Studs
4. Ecosse911 / Black / Studs

konrad911

So here are the 4 sets straight from the CNC shop.
I will bring them to anodising after this WE, so hope to start shipping early June.




I also tested a different finish, that I call „Silver OEM look”.

look like below.






Compared to anodised in Silver, this is more white’ish and matt.

So starting from now, three finishes available in addition to plain CNC ones obviously.
- Anodised in black
- Anodised in silver
- OEM look in silver

Other colors - ask

tjb616

A few drives in and these have completely solved my leaking timing cover issue. Thanks Konrad!

Careful though, the edge for the engine tin gasket channel is SHARP. I sliced my finger pretty good. The rest of the edges are well finished.

konrad911

Well done! I’m always happy to see these parts doing their job, rather than laying on the shelf.

Sorry to hear about your cut. I must have missed that edge.

Short update for the last orders - last week the anodising company was closed due to mourning after one of the owners passing away.

I’ll give them a ring tomorrow and write an update.

Ecosse911

Hi Konrad, any progress to report on the anodizing? 🙏

konrad911

Just called them today. Covers should be ready this Friday, which means I will start shipping next week.

I have one set on „my last resort shelf” from the previous batch, so if anyone is in a big hurry I can ship that set this week (saves about a week).

Pls PM me if you’re in a big hurry.