When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If anybody would be interested I have a set of 6 of these injectors taken from a 24k mile 997T for $210 shipped OBO
PM me as I don't check this thread often.
Originally Posted by vt951
Just a heads up, be careful which EV14 injectors you pick. Bosch 0280158123 is made for Porsche M97 engine (porsche pn: 99760513201) and uses a dual cone spray pattern.. I think they would need to be clocked differently than the 07K rail tabs allow to properly line up the spray pattern with the intake ports.
I don't know which EV14's the Audi guys are upgrading to... maybe a totally different one. But these seem to be the most readily available and are a nice flow rate for a turbo 07K (~60 lb/hr)
If anybody would be interested I have a set of 6 of these injectors taken from a 24k mile 997T for $210 shipped.
PM me as I don't check this thread often.
FYI, with the I.E. Fuel Rail you can clock the injectors any direction allowing the spray pattern on these injectors to work as intended.
Have you confirmed if these injectors clocked straight with the IE fuel rail will fit onto your cast manifold?
The connectors hit the runners, but mostly clear the other way. You would have to grind down a boss or two on the head, or just clock them a few degrees off.
Clocking won't matter as long as the harness reaches.
I should clarify that the injectors I posted about are original 997 Turbo and match the PN provided before, but have an EV14/Jetronic plug, different from the ones in that photo.
M97 injectors (0280158123) are twin-spray, so for those clocking may make a difference, I want to have the spray in the ports as designed. For the original VW injectors or the popular Bosch 980cc/min injectors (0280158040) clocking won't matter, as those are cone spray.
1: I hope you are staying safe, and sane, during these unprecedented times.
2: Alan and I have been working to get the oil pans shipped and it looks like that will happen next week (see below pic of the pickup tube assemblies)!
3: We ended up with 8 Sumps that are black, and 9 that are zinc (to cover the 17 open orders). We currently have 7 people who would like black, is anyone else interested in using the black ceramic coated sump?
1. Adam Z.
2. Spencer S.
3. Brian S.
4. Alex K.
5. Craig J.
6. Damien K.
7. Joey W.
8.
By all means ,,,, anybody that wants one of the black ones ,,, claim it . I am planning on powder coating my lower . Also , glad to see you guys are doing well during the lockdown .
By all means ,,,, anybody that wants one of the black ones ,,, claim it . I am planning on powder coating my lower . Also , glad to see you guys are doing well during the lockdown .
Per our offline discussion we are sending you black.
The rear coolant flanges just arrived and will be shipping out next week. That means those of you that have ordered your oil pan and rear coolant flange will be able to permanently install your engines!!!