Colorado Dyno Day! (updated, with video)
#1
Wax On, Wax Off
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2003
Location: 5280 ft above the sea
Posts: 17,727
Likes: 0
Received 3 Likes
on
3 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
sorry for the short notice, but we're doing a colorado dyno day this sunday, April 17th at DynoPro:
6231 Beach St,
Denver, CO 80221
(303) 455-2443
It's $75.00 per hour, as many pulls as you want. wideband available for monitoring your AFR's.
Give them a call to save your time slot. I'm at 1:00 PM, and I know they have one other guy at 3:00 PM. Hope to see ya there!
6231 Beach St,
Denver, CO 80221
(303) 455-2443
It's $75.00 per hour, as many pulls as you want. wideband available for monitoring your AFR's.
Give them a call to save your time slot. I'm at 1:00 PM, and I know they have one other guy at 3:00 PM. Hope to see ya there!
Last edited by Mighty Shilling; 04-17-2011 at 10:17 PM.
#4
Wax On, Wax Off
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2003
Location: 5280 ft above the sea
Posts: 17,727
Likes: 0
Received 3 Likes
on
3 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
For what it's worth, this is what I'm trying to beat. 268.45 HP, 311.74 ft-lbs. That was on Vitesse gear, This new one is on Rogue gear. we'll see how this looks
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#5
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I don't think you'll be dissapoibtrd but remember you are going to a different Dyno. I'm going to try to make it. Obviously boost limited bit I am curious about the comparisons at 18, 20 psi etc.
#7
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would love to see how your car does at 30psi (or 25, if you can't get the crossover figured out)!!
Trending Topics
#8
Wax On, Wax Off
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2003
Location: 5280 ft above the sea
Posts: 17,727
Likes: 0
Received 3 Likes
on
3 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ok so at 18 PSI, stock K26/8 I posted 310 HP and 351 ft-lbs.
http://www.youtube.com/watch?v=ITpXH...e_gdata_player
Mods list:
K26/8 (stock) Turbo
Pump gas
80# injectors
Rogue Tuning M-tune
Lindsey stage II Intercooler,
Blitz SBC-ID boost controller, 18 PSI
TiaL wastegate
Test pipe
http://www.youtube.com/watch?v=ITpXH...e_gdata_player
Mods list:
K26/8 (stock) Turbo
Pump gas
80# injectors
Rogue Tuning M-tune
Lindsey stage II Intercooler,
Blitz SBC-ID boost controller, 18 PSI
TiaL wastegate
Test pipe
Last edited by Mighty Shilling; 04-17-2011 at 10:14 PM.
#9
Wax On, Wax Off
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2003
Location: 5280 ft above the sea
Posts: 17,727
Likes: 0
Received 3 Likes
on
3 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Quick note, my K26/8 petered out to about 14 PSI at the end of the run. Since I've been bitten by the damned mod bug a bigger turbo is planned for the long term.