Pauly's go quicker project. (Data Logs!)
#183
Thread Starter
Professional Hoon
Rennlist Member
Rennlist Member
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
Thanks Patrick! If it goes to plan, it should be up on the road by friday.
Cheers mate! i hear ya, i cannot wait myself!
Yeah, i was surprised how well it fit between the runner and the throttle body. i was prepared to modify the plug and all.
Yeah, i was surprised how well it fit between the runner and the throttle body. i was prepared to modify the plug and all.
#185
Thread Starter
Professional Hoon
Rennlist Member
Rennlist Member
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
Thanks , That's Dads welding, i couldn't do as half as good of a job. but we've got a new TIG so i can practice now
The muffler should quieten it a bit but on full boost... hahaha. If its to loud I'll add another muffler in the exhaust and if the wastegate sounds crap I'll add a muffler or a hotdog to quieten it down.
Yeah we've got a lot of restrictions on our roads. 90% of my car complies with the law now. My exhaust doesn't (no cat and might be to loud, hope not though)
The muffler should quieten it a bit but on full boost... hahaha. If its to loud I'll add another muffler in the exhaust and if the wastegate sounds crap I'll add a muffler or a hotdog to quieten it down.
Yeah we've got a lot of restrictions on our roads. 90% of my car complies with the law now. My exhaust doesn't (no cat and might be to loud, hope not though)
#186
Nice job, everything is looking good. Getting close to a test run I bet.
I'm getting ready to tear into mine to install the s head. I'll be re-doing my crossover and exhaust too. I hope it comes out as nice.
I'm getting ready to tear into mine to install the s head. I'll be re-doing my crossover and exhaust too. I hope it comes out as nice.
#187
Thread Starter
Professional Hoon
Rennlist Member
Rennlist Member
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
Oh the Crossover IMO is a PITA, each time something is welded it moves...
That's probably been the biggest headache so far is the welding and everything moving.
#188
Thread Starter
Professional Hoon
Rennlist Member
Rennlist Member
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
A few more things done today. first off before i went to work i stopped off at a local exhaust shop to get some flairs done to the wastegate pipe to make it an easier fit.
Once i got home we welded some up, put the Xover on and made sure the V-Band from the down pipe wasn't getting in the way of the Xover. i got the wastegate on with the dump pipe from it so tomorrow i can measure up how long i need the wastegate exhaust will be so get that finished.
Once i got home we welded some up, put the Xover on and made sure the V-Band from the down pipe wasn't getting in the way of the Xover. i got the wastegate on with the dump pipe from it so tomorrow i can measure up how long i need the wastegate exhaust will be so get that finished.
#192
#194
Thread Starter
Professional Hoon
Rennlist Member
Rennlist Member
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
Cheers Wayne! It has taken 4-5 months to do all this. not including the 3 months While in Europe.
#195
Thread Starter
Professional Hoon
Rennlist Member
Rennlist Member
Joined: Jan 2010
Posts: 7,090
Likes: 4
From: Melbourne, Australia
I have finished the exhaust. which means I've finished the car
I've put everything back together in probably 4 hours. Changed the oil ect. but havn't started it yet. waiting on my MAP sensor to arrive to start it or the DME will think it's in full boost LOL.
The exhaust isn't on a angle, it's just how the photo came out
I've put everything back together in probably 4 hours. Changed the oil ect. but havn't started it yet. waiting on my MAP sensor to arrive to start it or the DME will think it's in full boost LOL.
The exhaust isn't on a angle, it's just how the photo came out